Messages in this thread | | | Date | Sun, 11 Mar 2001 15:37:52 -0600 | From | Steven Walter <> | Subject | Re: IDE on 2.4.2 |
| |
On Sun, Mar 11, 2001 at 10:03:48PM +0100, Martin Diehl wrote: > On Fri, 9 Mar 2001, Lawrence MacIntyre wrote: > > > Uniform MultiPlatform E-IDE driver Revision 6.31 > > ide: assuminmg 33 MHz system bus speed for PIO modes: override with > > idebus=xx > > SIS5513: IDE controller on PCI bus 00 dev 09 > > PCI: Assigned IRQ 14 for device 00:01.1 > > SIS5513: chipset revision 208 > > SIS5513: not 100% native mode: will probe irqs later > > SIS5597 > > ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio > > ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio > > hda: Maxtor 90640D4, ATA DISK drive > > hdc: CD-ROM CDU55E, ATAPI CD/DVD-ROM drive > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > ide1 at 0x170-0x177,0x376 on irq 15 > > > > At this point, the machine hangs... > > interesting, I see the same thing except it hangs not before the disk > drives are initialized but afterwards, when initializing the CD-ROM > drives. (Compiling ide-cd as module permits successful boot but hangs > on insmod). This is with SiS5513 rev 208 IDE function from SiS5591 > chipset with CONFIG_BLK_DEV_SIS5513 and autotune enabled (default).
I have this exact same chip on my board (a PCChips M599-LMR or something like that) which works flawlessly on 2.4.2, even with UDMA66. -- -Steven Never ask a geek why, just nod your head and slowly back away. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |