Messages in this thread | | | Date | Thu, 30 Mar 2000 08:09:42 -0500 | From | Ted Sikora <> | Subject | Re: 2.3.99-pre3 UDMA33 Errors |
| |
Andre Hedrick wrote: > > On Wed, 29 Mar 2000, Ted Sikora wrote: > > hda:hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } > > hda: dma_intr: error=0x84 { DriveStatusError BadCRC } > > hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } > > hda: dma_intr: error=0x84 { DriveStatusError BadCRC } > > hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } > > hda: dma_intr: error=0x84 { DriveStatusError BadCRC } > > hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } > > hda: dma_intr: error=0x84 { DriveStatusError BadCRC } > > hda: DMA disabled > > --------------------------------------------------------- > > > > 2.2.14-pre15 is fine with ide patch > > Do you mean "ide.2.2.15-14.20000325.patch"? ide.2.2.15-15.20000317.patch.bz2 > > Did you enable "CONFIG_WDC_ALI15X3" without reading the "FOOLS Warning"? > No...it's diasabled. I saw (DANGEROUS)and heeded the warning.
> ALI M15x3 WDC support (DANGEROUS) > CONFIG_WDC_ALI15X3 > This allows for UltraDMA support for WDC drives that ignore CRC checking. > You are a fool for enabling this option, but there have been requests. > DO NOT COMPLAIN IF YOUR DRIVE HAS FS CORUPTION, IF YOU ENABLE THIS! > No one will listen, just laugh for ignoring this SERIOUS WARNING. > > Using this option can allow WDC drives to run at ATA-4/5 transfer rates with > only an ATA-2 support structure. > > SAY NO! > > People who claim they have IBM drives that are Stamped WDC are potentially > safe, otherwise............
It was working fine up until now. Previous 2.3 kernels have been problem free except under fsck for quite awhile. My Maxtor/IBM drives have never produced errors and are very fast with the patches. Strangely they seem better under UDMA33 rather than UDMA66.
-- Ted Sikora Jtl Development Group tsikora@powerusersbbs.com
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |