lkml.org 
[lkml]   [2000]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: patch: reiserfs for 2.3.49
Den 11-Mar-00 17:59:40 skrev Chris Mason følgende om "patch: reiserfs for 2.3.49":
> Hello everyone,

> ReiserFS for 2.3.49 is now available for testing, comments, and review.

At compile time, make install in linux/fs/reiserfs/utils fails because
reiserfsck is not being compiled.

At runtime, I have run into an unexpected problem compiling a kernel on
reiserfs (i.e. the kernel tree is on a reiserfs partition). When I exit
from make config, the screen shows

Saving your kernel configuration...

and that's it, the shell prompt never returns. On the console:

ReiserFS version 3.6.1
12285
0: reiserfs_get_block
PAP-12285: balance_leaf: insert_size must be 0 (4)

and the system is locked so solid that <Alt-SysReq-s> and <Alt-SysReq-u>
don't work. After a restart, I could reproduce the problem, again when
exiting from make menuconfig. Reiserfs was compiled into the kernel. The
disk where I can reproduce this problem:

md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
linear personality registered
raid0 personality registered
md.c: sizeof(mdp_super_t) = 4096
Configuring aha174x at IO:4c80, IRQ 12
aha174x: Extended translation enabled.
scsi0 : Adaptec 174x (EISA)
scsi : 1 host.
Vendor: CDC Model: 94181-15 Rev: 0293
Type: Direct-Access ANSI SCSI revision: 01 CCS
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: CDC Model: 94181-15 Rev: 0293
Type: Direct-Access ANSI SCSI revision: 01 CCS
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
scsi : detected 2 SCSI disks total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 1173930 [573 MB] [0.6 GB]
sda: sda1 sda2 sda3
SCSI device sdb: hdwr sector= 512 bytes. Sectors= 1173930 [573 MB] [0.6 GB]
sdb: sdb1 sdb2
[cut]
(read) sda2's sb offset: 551872 [events: 00000004]
(read) sdb2's sb offset: 551872 [events: 00000004]
autorun ...
considering sdb2 ...
adding sdb2 ...
adding sda2 ...
created md0
bind<sda2,1>
bind<sdb2,2>
running: <sdb2><sda2>
now!
sdb2's event counter: 00000004
sda2's event counter: 00000004
md0: max total readahead window set to 128k
md0: 1 data-disks, max readahead per data-disk: 128k
md: updating md0 RAID superblock on device
sdb2 [events: 00000005](write) sdb2's sb offset: 551872
sda2 [events: 00000005](write) sda2's sb offset: 551872
.
... autorun DONE.

In both cases, the file system was mounted manually with "mount -t
reiserfs /dev/md0 /mnt/temp2", i.e. no options. My /etc/raidtab:

raiddev /dev/md0
raid-level linear
nr-raid-disks 2
persistent-superblock 1
chunk-size 16
device /dev/sda2
raid-disk 0
device /dev/sdb2
raid-disk 1

My /proc/cpuinfo:

processor : 0
vendor_id : unknown
cpu family : 4
model : 0
model name : unknown
stepping : unknown
fdiv_bug : no
hlt_bug : no
sep_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : -1
wp : yes
flags :
bogomips : 32.87

My /proc/version:

Linux version 2.3.49 (root@vissevasse.kampsax.dtu.dk) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #10 Sat Mar 11 20:19:56 CET 2000

Regards,

/¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯T¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯\
| Rask Ingemann Lambertsen | E-mail: mailto:rask@kampsax.dtu.dk |
| Please do NOT Cc: to me or the | WWW: http://www.gbar.dtu.dk/~c948374/ |
| mailing list. I am on the list.| "ThrustMe" on XPilot, ARCnet and IRC |
| Linux is like a wigwam - no windows, no gates, apache inside! |


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:57    [W:0.137 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site