Messages in this thread | | | Date | Thu, 20 Jan 2000 00:12:32 +0100 (CET) | From | Leos Bitto <> | Subject | Re: eepro100 problems with 2.2.15pre[123] |
| |
On Wed, 19 Jan 2000, Urban Widmark wrote:
> 2 linux boxes with "identical" cards: > eth0: Intel EtherExpress Pro 10/100 at 0xfce0, 00:A0:C9:1D:D6:04, IRQ 11. > Board assembly 352509-003, Physical connectors present: RJ45 > Primary interface chip DP83840 PHY #1. > DP83840 specific setup, setting register 23 to 8462.
Hmm, your card has another chipset, so I'm not so much surprised that you are not able to reproduce the problem. I haven't seen chip DP83840 in eepro100 before, I am dealing only with i8255X.
> You mentioned heavy uploads. What exactly is a heavy upload?
Local 10 Mbps network (computers connected to hubs, hubs connected to switches, switches have 100 MBps uplink to the backbone), AMD K6-2/450 uploading at full speed of that poor 10 MBps net. I get transmit errors during uploading of first 10 megabytes of data via FTP regullary, then error occur every 1 megabyte or so. I tested it against a lot of different NICs, problems survive all the time.
I never had any kind of problems with this setup with 2.2.14. Actually now I am running 2.2.15pre2 with eepro100.c from 2.2.14 and I am having no problems too.
Leos
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |