Messages in this thread | | | Subject | Re: Need help on two issues from Linux Guru. | Date | Thu, 23 Sep 1999 12:12:20 +0100 (BST) | From | Alan Cox <> |
| |
> I am trying to make module run under SMP system (Viper with 8 CPUs) but > failed in loading process. System message: > ./hpfc: kernel was compiled for kernel version 2.2.5-15 > while this kernel is version 2.2.5-15smp
This is a non SMP module built against an SMP kernel. In this case its a Red Hat specific "accident trap". Add smp to the EXTRAVERSION flag sin the top make file
I would actually suggest you pick up a newer kernel (2.2.12 say) and built that from scratch with your driver, rather than trying to build your modules without having a full kernel build tree to hand
> those 10 tested devices. However, after successfully detected all 10 > devices, only four device nodes are given to be accessible, sdb, sdc, sdd, > sde. Two of them from first HBA and two from the second.
Very odd.
> I also tried qlogic fibre channel HBA with 8 device connected. The result > is the same. Only four devices are accessible.
I've actually had 8 disks on a qlogic FC without a problem.
Alan
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |