Messages in this thread | | | Date | Thu, 16 Sep 1999 22:20:29 -0400 | From | Ken Witherow <> | Subject | Re: 2.3.>14? Advansys no-go |
| |
Rik van Riel wrote: > > Hi Bob, > > there's a _big_ problem with the advansys driver as > included with the newer kernels. They don't detect > my APB940U card, not even if I explicity tell the > address (which seems to be illigal for PCI cards > anyway). > > The latest kernel that I've successfully tested is > 2.2.12-pre1. There might be working ones after that, > but I haven't tested that.
Works fine here on 2.2.12 and 2.3.18
/var/log/dmesg Linux version 2.3.18 (root@krw.dyndns.org) (gcc version egcs-2.91.60 19981201 (egcs-1.1.1 release)) #6 Sun Sep 12 03:13:31 /usr/loca l/etc/localtime 1999 scsi0 : AdvanSys SCSI 3.2G: PCI Ultra 16 CDB: IO D800/F, IRQ 12 scsi : 1 host. Vendor: MATSHITA Model: CD-R CW-7502 Rev: 4.05 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0 scsi : detected 1 SCSI cdrom total. sr0: scsi3-mmc drive: 8x/8x writer xa/form2 cdda tray
/proc/scsi/advansys/0
Device Information for AdvanSys SCSI Host 0: Target IDs Detected: 6, 7, (7=Host Adapter) Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: MATSHITA Model: CD-R CW-7502 Rev: 4.05 Type: CD-ROM ANSI SCSI revision: 02 EEPROM Settings for AdvanSys SCSI Host 0: Serial Number: AE54C713B960 Host SCSI ID: 7, Host Queue Size: 16, Device Queue Size: 8 cntl ff00, no_scam 8 Target ID: 0 1 2 3 4 5 6 7 Disconnects: Y Y Y N Y Y Y Y Command Queuing: N N N N N N N N Start Motor: Y Y Y N Y Y Y Y Synchronous Transfer: Y Y Y Y Y Y Y Y Linux Driver Configuration and Information for AdvanSys SCSI Host 0: host_busy 0, last_reset 0, max_id 8, max_lun 8, max_channel 0 unique_id 0, can_queue 16, this_id 7, sg_tablesize 50, cmd_per_lun 0 unchecked_isa_dma 0, use_clustering 1, loaded_as_module 0 flags 8, last_reset 0, jiffies 4e90 queue_depth: 6:4 Linux Driver Statistics for AdvanSys SCSI Host 0: command 0, queuecommand 9, abort 0, reset 0, biosparam 0 interrupt 11, callback 9, done 9 exe_noerror 9, exe_busy 0, exe_error 0, exe_unknown 0 build_error 0 cont_cnt 9, cont_xfer 1.0 kb avg_xfer 0.1 kb Active and Waiting Request Queues (Time Unit: 100 HZ): target 6 active: cnt [cur 0, max 1, tot 3], time [min 0, max 1, avg 0.3] waiting: cnt [cur 0, max 0, tot 0], time [min 0, max 0, avg 0.0] Asc Library Configuration and Statistics for AdvanSys SCSI Host 0: chip_version 10, lib_version 118, lib_serial_no 121, mcode_date 12c3 mcode_version 50d, err_code 0 Total Command Pending: 0 Command Queuing: 6:N Command Queue Pending: 6:0 Command Queue Limit: 6:4 Command Queue Full: 6:N Synchronous Transfer: 6:Y 6: Transfer Period Factor: 25 (10.0 Mhz), REQ/ACK Offset: 8
-- Ken Witherow Keeper of the alt.rock-n-roll.metal.metallica FAQ http://www.frontiernet.net/~phantoml/armm.html Linux 2.3.18 - Because I'd like to get there today
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |