Messages in this thread | | | Date | Fri, 20 Aug 1999 21:43:50 -0700 (PDT) | From | <> | Subject | Re: IDE help welcome :) |
| |
Apply patch to kernel and get SiS5513 support based upon the HOST in the chipset.
Find your local kernel mirror://pub/linux/kernel/people/hedrick/
Andre Hedrick The Linux IDE guy
On Fri, 20 Aug 1999, DAVID SIMS 1 281 285 7792 wrote:
> Hi folks, > > I'm not a subscriber to this list so please respond via email if > possible <sims@sugar-land.sl.slb.com>. > > The problem: > > I have a Aaeon <http://www.aaeon.com> PCM-5894/5892 SBC with SiS 5582 > (from the chip on the board) chipset... It has an Award BIOS... I am trying > to use it with a Toshiba MK6409MAV 2.5 inch disk drive... It 'sort of' > works but I get lots of errors (many <Busy>) and occasional corruption/ > confusion/long delays while reading the drive.... I am running the latest > slackware and Kernel 2.2.6... I am in the process of upgrading the > kernel to 2.2.11 at the moment but decided to send off this note hoping > someone would be able to say 'move foo to bar and all will be well'.... > > I have been using Linux for a few years now and this is the first time > I have seen anything like this. The problem has been going on for a month > or so now and I am just about fed up so any help would be welcome :) > > If I look in /proc/pci I see the following: > > PCI devices found: > Bus 0, device 0, function 0: > Host bridge: Silicon Integrated Systems 5597/5598 Host (rev 16). > Medium devsel. Master Capable. Latency=255. > Bus 0, device 1, function 0: > ISA bridge: Silicon Integrated Systems 85C503 (rev 1). > Medium devsel. Master Capable. No bursts. > Bus 0, device 1, function 1: > IDE interface: Silicon Integrated Systems 85C5513 (rev 208). > Fast devsel. IRQ 14. Master Capable. Latency=64. > I/O at 0x1f0 [0x1f1]. > I/O at 0x3f4 [0x3f5]. > I/O at 0x170 [0x171]. > I/O at 0x374 [0x375]. > I/O at 0x4000 [0x4001]. > Bus 0, device 1, function 2: > USB Controller: Silicon Integrated Systems 7001 USB (rev 16). > Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable. Latency=64 > Non-prefetchable 32 bit memory at 0xe2000000 [0xe2000000]. > Bus 0, device 11, function 0: > Ethernet controller: Realtek 8139 (rev 16). > Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable. Latency=64. Min Gnt=32.Max Lat=64. > I/O at 0xe000 [0xe001]. > Non-prefetchable 32 bit memory at 0xe2001000 [0xe2001000]. > Bus 0, device 13, function 0: > VGA compatible controller: Chips & Technologies 65554 (rev 194). > Medium devsel. Fast back-to-back capable. > Non-prefetchable 32 bit memory at 0xe0000000 [0xe0000000]. > > > The error I am seeing on the console at boot up with the Toshiba > drive is: > > hda: drive_cmd: error 0x04 { DriveStatusError } > hda: drive_cmd: status 0x51 { DriveReady SeekComplete Error } > > If I install the Toshiba drive on another PC it seems to run fine.... > > At this point, any clues are more than welcome. I'm ready to do almost > ANYTHING... > > TIA, > > Dave > > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.rutgers.edu > Please read the FAQ at http://www.tux.org/lkml/ >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |