lkml.org 
[lkml]   [1999]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: UDMA and VIA APOLLO CHIPSET
Date
From
> 	On boot-up I get this ..........
> hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }

UDMA CRC errors. That normally indicates a bad cable (typically over
long). Presumably the BIOS wasnt using UDMA and you had the IDE DMA AUTOTUNE
option enabled (not btw always a good idea)

> hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
> hda: DMA disabled
> ide0: reset: success

And Linux gives up on using DMA.

Alan



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:52    [W:0.085 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site