Messages in this thread | | | From | Keith Owens <> | Subject | Re: RH6 && LILO && SCSI HDD. | Date | Fri, 30 Jul 1999 20:11:50 +1000 |
| |
On Fri, 30 Jul 1999 19:35:11 +1000, Mofeed Shahin <shahin@labf.org> wrote: >I have in my machine 2 ide drives and 1 Ultra2 scsi drive. I would like to >install linux on the ultra2 scsi drive. >Booting with the default kernel works fine, but when I tried using the new >kernel it boots up and stops at "LI".
Assuming your motherboard has an option to boot from SCSI before IDE.
* Set the M/B to boot SCSI before IDE. * Put your / partition on SCSI ID 0. * Add these lines to /etc/lilo.conf
boot=/dev/sda disk=/dev/sda bios=0x80
plus any other config lines you need.
bios=0x80 tells LILO "/dev/sda is the boot disk, ignore what the BIOS says". Without that, LILO tends to assume that the first IDE drive is the boot disk, with nasty results.
Works for me.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |