Messages in this thread | | | Subject | Re: Intel Xpress Server - IO APIC trouble - Kernel panic: IO APIC + timer doesn't work! | Date | Thu, 29 Jul 1999 10:11:13 -0500 | From | James Bottomley <> |
| |
sweetheart0@home.com said: > the message was the same exept the part about the bus speed, it was > reported at 33mhz. The IO-APIC said pins 0,2,13 not connected, only > said 2 and 13 before, and the setting up timer as ExtINT said found > pin0... then it failed... I am going to try the patch Marcie sent me > next... I figure if the patch she sent me helps in other areas I may > be able to take the little C I know and combine the 2 to make it > work... I will report back to the group... but unfotunately I am in > the process of moving and losing my ISP... not sure when I will get > back on.
Could you send the text of the new boot up sequence? What is the failure, hang or crash? There are several potential causes of the problem:
1) The eagle is 486 (or pentium with external local apic based) The code to handle this cause could be causing grief 2) There's special code to detect the IO-APIC and re-route the interrupts in physical mode, is this getting triggered?
James
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |