Messages in this thread | | | Date | Mon, 28 Jun 1999 17:59:00 -0500 | From | Paul Fulghum <> | Subject | Re: [2.2.10]: access beyond end of device |
| |
Alan Cox wrote: > > > Supermicro P6DGU P2-400 x 2 > > 128MB > > AIC7895 SCSI > > Again AIC7xxx. There may be another more obscure bug hiding somewhere, but > we are running at 85% AIC7xxx users seeing corruption. > > Alan > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.rutgers.edu > Please read the FAQ at http://www.tux.org/lkml/
Here are the logs from this incident:
Jun 18 22:45:01 p6 syslogd 1.3-3: restart. Jun 18 22:45:01 p6 syslog: syslogd startup succeeded Jun 18 22:45:01 p6 kernel: klogd 1.3-3, log source = /proc/kmsg started. Jun 18 22:45:01 p6 kernel: Inspecting /boot/System.map-2.2.10 Jun 18 22:45:01 p6 syslog: klogd startup succeeded Jun 18 22:45:02 p6 kernel: Loaded 8226 symbols from /boot/System.map-2.2.10. Jun 18 22:45:02 p6 kernel: Symbols match kernel version 2.2.10. Jun 18 22:45:02 p6 kernel: Loaded 2 symbols from 3 modules. Jun 18 22:45:02 p6 kernel: Linux version 2.2.10 (root@p6.pipehead.org) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 SMP Tue Jun 15 18:07:59 CDT 1999 Jun 18 22:45:02 p6 kernel: Intel MultiProcessor Specification v1.1 Jun 18 22:45:02 p6 kernel: Virtual Wire compatibility mode. Jun 18 22:45:02 p6 kernel: OEM ID: INTEL Product ID: 440BX APIC at: 0xFEE00000 Jun 18 22:45:02 p6 kernel: Processor #0 Pentium(tm) Pro APIC version 17 Jun 18 22:45:02 p6 kernel: Processor #1 Pentium(tm) Pro APIC version 17 Jun 18 22:45:02 p6 kernel: I/O APIC #2 Version 17 at 0xFEC00000. Jun 18 22:45:02 p6 kernel: Processors: 2 Jun 18 22:45:02 p6 kernel: mapped APIC to ffffe000 (fee00000) Jun 18 22:45:02 p6 kernel: mapped IOAPIC to ffffd000 (fec00000) Jun 18 22:45:02 p6 kernel: Detected 400916850 Hz processor. Jun 18 22:45:02 p6 kernel: Console: colour VGA+ 80x25 Jun 18 22:45:02 p6 kernel: Calibrating delay loop... 399.77 BogoMIPS Jun 18 22:45:02 p6 kernel: Memory: 127540k/131072k available (1356k kernel code, 416k reserved, 1692k data, 68k init) Jun 18 22:45:02 p6 kernel: VFS: Diskquotas version dquot_6.4.0 initialized Jun 18 22:45:02 p6 kernel: Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Jun 18 22:45:02 p6 kernel: Checking 'hlt' instruction... OK. Jun 18 22:45:02 p6 kernel: POSIX conformance testing by UNIFIX Jun 18 22:45:02 p6 kernel: mtrr: v1.35 (19990512) Richard Gooch (rgooch@atnf.csiro.au) Jun 18 22:45:02 p6 kernel: per-CPU timeslice cutoff: 100.22 usecs. Jun 18 22:45:02 p6 kernel: CPU0: Intel Pentium II (Deschutes) stepping 01 Jun 18 22:45:02 p6 kernel: calibrating APIC timer ... Jun 18 22:45:02 p6 kernel: ..... CPU clock speed is 400.9177 MHz. Jun 18 22:45:02 p6 kernel: ..... system bus clock speed is 100.2292 MHz. Jun 18 22:45:02 p6 kernel: Booting processor 1 eip 2000 Jun 18 22:45:02 p6 kernel: Calibrating delay loop... 400.59 BogoMIPS Jun 18 22:45:02 p6 kernel: OK. Jun 18 22:45:02 p6 kernel: CPU1: Intel Pentium II (Deschutes) stepping 01 Jun 18 22:45:02 p6 kernel: Total of 2 processors activated (800.36 BogoMIPS). Jun 18 22:45:02 p6 kernel: enabling symmetric IO mode... ...done. Jun 18 22:45:02 p6 kernel: ENABLING IO-APIC IRQs Jun 18 22:45:02 p6 kernel: init IO_APIC IRQs Jun 18 22:45:02 p6 kernel: IO-APIC pin 0, 5, 10, 11, 15, 20, 21, 22, 23 not connected. Jun 18 22:45:02 p6 kernel: number of MP IRQ sources: 17. Jun 18 22:45:02 p6 kernel: number of IO-APIC registers: 24. Jun 18 22:45:02 p6 kernel: testing the IO APIC....................... Jun 18 22:45:02 p6 kernel: .... register #00: 02000000 Jun 18 22:45:02 p6 kernel: ....... : physical APIC id: 02 Jun 18 22:45:02 p6 kernel: .... register #01: 00170011 Jun 18 22:45:02 p6 kernel: ....... : max redirection entries: 0017 Jun 18 22:45:02 p6 kernel: ....... : IO APIC version: 0011 Jun 18 22:45:02 p6 kernel: .... register #02: 00000000 Jun 18 22:45:02 p6 kernel: ....... : arbitration: 00 Jun 18 22:45:02 p6 kernel: .... IRQ redirection table: Jun 18 22:45:02 p6 atd: atd startup succeeded Jun 18 22:45:02 p6 kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: Jun 18 22:45:02 p6 kernel: 00 000 00 1 0 0 0 0 0 0 00 Jun 18 22:45:02 p6 kernel: 01 000 00 0 0 0 0 0 1 1 59 Jun 18 22:45:02 p6 kernel: 02 0FF 0F 0 0 0 0 0 1 1 51 Jun 18 22:45:02 p6 kernel: 03 000 00 0 0 0 0 0 1 1 61 Jun 18 22:45:02 p6 kernel: 04 000 00 0 0 0 0 0 1 1 69 Jun 18 22:45:02 p6 kernel: 05 000 00 1 0 0 0 0 0 0 00 Jun 18 22:45:02 p6 kernel: 06 000 00 0 0 0 0 0 1 1 71 Jun 18 22:45:02 p6 kernel: 07 000 00 0 0 0 0 0 1 1 79 Jun 18 22:45:02 p6 kernel: 08 000 00 0 0 0 0 0 1 1 81 Jun 18 22:45:02 p6 kernel: 09 000 00 0 0 0 0 0 1 1 89 Jun 18 22:45:02 p6 kernel: 0a 000 00 1 0 0 0 0 0 0 00 Jun 18 22:45:02 p6 kernel: 0b 000 00 1 0 0 0 0 0 0 00 Jun 18 22:45:02 p6 kernel: 0c 000 00 0 0 0 0 0 1 1 91 Jun 18 22:45:02 p6 kernel: 0d 000 00 1 0 0 0 0 0 0 00 Jun 18 22:45:02 p6 kernel: 0e 000 00 0 0 0 0 0 1 1 99 Jun 18 22:45:02 p6 kernel: 0f 000 00 1 0 0 0 0 0 0 00 Jun 18 22:45:02 p6 kernel: 10 0FF 0F 1 1 0 1 0 1 1 A1 Jun 18 22:45:02 p6 kernel: 11 0FF 0F 1 1 0 1 0 1 1 A9 Jun 18 22:45:02 p6 kernel: 12 0FF 0F 1 1 0 1 0 1 1 B1 Jun 18 22:45:02 p6 kernel: 13 0FF 0F 1 1 0 1 0 1 1 B9 Jun 18 22:45:02 p6 kernel: 14 000 00 1 0 0 0 0 0 0 00 Jun 18 22:45:02 p6 kernel: 15 000 00 1 0 0 0 0 0 0 00 Jun 18 22:45:02 p6 kernel: 16 000 00 1 0 0 0 0 0 0 00 Jun 18 22:45:02 p6 kernel: 17 000 00 1 0 0 0 0 0 0 00 Jun 18 22:45:02 p6 crond: crond startup succeeded Jun 18 22:45:02 p6 kernel: .................................... done. Jun 18 22:45:02 p6 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfdb81 Jun 18 22:45:02 p6 kernel: PCI: Using configuration type 1 Jun 18 22:45:02 p6 kernel: PCI: Probing PCI hardware Jun 18 22:45:02 p6 kernel: Linux NET4.0 for Linux 2.2 Jun 18 22:45:02 p6 kernel: Based upon Swansea University Computer Society NET3.039 Jun 18 22:45:02 p6 kernel: NET4: Unix domain sockets 1.0 for Linux NET4.0. Jun 18 22:45:02 p6 kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Jun 18 22:45:02 p6 rc: Starting pcmcia succeeded Jun 18 22:45:02 p6 kernel: IP Protocols: ICMP, UDP, TCP Jun 18 22:45:02 p6 kernel: Initializing RT netlink socket Jun 18 22:45:02 p6 kernel: Starting kswapd v 1.5 Jun 18 22:45:02 p6 kernel: Detected PS/2 Mouse Port. Jun 18 22:45:02 p6 kernel: Serial driver version 4.27 with no serial options enabled Jun 18 22:45:02 p6 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A Jun 18 22:45:02 p6 kernel: pty: 256 Unix98 ptys configured Jun 18 22:45:02 p6 kernel: Real Time Clock Driver v1.09 Jun 18 22:45:02 p6 kernel: Non-volatile memory driver v1.0 Jun 18 22:45:02 p6 kernel: RAM disk driver initialized: 16 RAM disks of 4096K size Jun 18 22:45:02 p6 kernel: PIIX4: IDE controller on PCI bus 00 dev 39 Jun 18 22:45:02 p6 kernel: PIIX4: device not capable of full native PCI mode Jun 18 22:45:02 p6 kernel: PIIX4: device disabled (BIOS) Jun 18 22:45:02 p6 kernel: Floppy drive(s): fd0 is 1.44M Jun 18 22:45:02 p6 kernel: FDC 0 is a post-1991 82077 Jun 18 17:44:54 p6 rc.sysinit: Loading default keymap succeeded Jun 18 17:44:55 p6 rc.sysinit: Setting default font succeeded Jun 18 17:44:55 p6 swapon: swapon: warning: /dev/sdb5 has insecure permissions 0660, 0600 suggested Jun 18 17:44:55 p6 rc.sysinit: Activating swap partitions succeeded Jun 18 17:44:55 p6 rc.sysinit: Setting hostname p6.pipehead.org succeeded Jun 18 17:44:55 p6 fsck: /dev/sdb7: clean, 64598/1024000 files, 1612482/4088511 blocks Jun 18 17:44:55 p6 rc.sysinit: Checking root filesystem succeeded Jun 18 17:44:55 p6 rc.sysinit: Remounting root filesystem in read-write mode succeeded Jun 18 17:44:55 p6 rc.sysinit: Finding module dependencies succeeded Jun 18 17:44:55 p6 fsck: /dev/sdb6: clean, 245/102800 files, 25510/409601 blocks Jun 18 17:44:55 p6 rc.sysinit: Checking filesystems succeeded Jun 18 22:45:02 p6 kernel: (scsi0) <Adaptec AIC-7895 Ultra SCSI host adapter> found at PCI 14/0 Jun 18 22:45:02 p6 kernel: (scsi0) Wide Channel A, SCSI ID=7, 32/255 SCBs Jun 18 22:45:02 p6 kernel: (scsi0) Warning - detected auto-termination Jun 18 22:45:02 p6 kernel: (scsi0) Please verify driver detected settings are correct. Jun 18 22:45:02 p6 kernel: (scsi0) If not, then please properly set the device termination Jun 18 22:45:02 p6 kernel: (scsi0) in the Adaptec SCSI BIOS by hitting CTRL-A when prompted Jun 18 22:45:02 p6 kernel: (scsi0) during machine bootup. Jun 18 22:45:02 p6 kernel: (scsi0) Cables present (Int-50 NO, Int-68 NO, Ext-68 NO) Jun 18 22:45:02 p6 kernel: (scsi0) Downloading sequencer code... 374 instructions downloaded Jun 18 22:45:02 p6 kernel: (scsi1) <Adaptec AIC-7895 Ultra SCSI host adapter> found at PCI 14/1 Jun 18 22:45:02 p6 kernel: (scsi1) Wide Channel B, SCSI ID=7, 32/255 SCBs Jun 18 22:45:02 p6 kernel: (scsi1) Warning - detected auto-termination Jun 18 22:45:02 p6 kernel: (scsi1) Please verify driver detected settings are correct. Jun 18 17:44:56 p6 rc.sysinit: Mounting local filesystems succeeded Jun 18 17:44:56 p6 rc.sysinit: Turning on user and group quotas for local filesystems succeeded Jun 18 22:44:59 p6 date: Fri Jun 18 22:44:59 CDT 1999 Jun 18 22:44:59 p6 rc.sysinit: Setting clock : Fri Jun 18 22:44:59 CDT 1999 succeeded Jun 18 22:44:59 p6 rc.sysinit: Enabling swap space succeeded Jun 18 22:44:59 p6 init: Entering runlevel: 5 Jun 18 22:44:59 p6 network: Enabling IPv4 packet forwarding succeeded Jun 18 22:45:00 p6 network: Bringing up interface lo succeeded Jun 18 22:45:01 p6 network: Bringing up interface eth0 succeeded Jun 18 22:45:01 p6 portmap: portmap startup succeeded Jun 18 22:45:01 p6 netfs: Mounting other filesystems succeeded Jun 18 22:45:01 p6 random: Initializing random number generator succeeded Jun 18 22:45:03 p6 inet: inetd startup succeeded Jun 18 22:45:02 p6 kernel: (scsi1) If not, then please properly set the device termination Jun 18 22:45:02 p6 kernel: (scsi1) in the Adaptec SCSI BIOS by hitting CTRL-A when prompted Jun 18 22:45:02 p6 kernel: (scsi1) during machine bootup. Jun 18 22:45:02 p6 kernel: (scsi1) Cables present (Int-50 NO, Int-68 NO, Ext-68 NO) Jun 18 22:45:02 p6 kernel: (scsi1) Downloading sequencer code... 374 instructions downloaded Jun 18 22:45:02 p6 kernel: scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.17/3.2.4 Jun 18 22:45:02 p6 kernel: <Adaptec AIC-7895 Ultra SCSI host adapter> Jun 18 22:45:02 p6 kernel: scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.17/3.2.4 Jun 18 22:45:02 p6 kernel: <Adaptec AIC-7895 Ultra SCSI host adapter> Jun 18 22:45:02 p6 kernel: scsi : 2 hosts. Jun 18 22:45:02 p6 kernel: (scsi0:0:3:0) Synchronous at 10.0 Mbyte/sec, offset 15. Jun 18 22:45:02 p6 kernel: Vendor: PLEXTOR Model: CD-ROM PX-20TS Rev: 1.01 Jun 18 22:45:03 p6 snmpd: snmpd startup succeeded Jun 18 22:45:02 p6 kernel: Type: CD-ROM ANSI SCSI revision: 02 Jun 18 22:45:02 p6 kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 Jun 18 22:45:02 p6 kernel: Vendor: RICOH Model: MP6200S Rev: 1.20 Jun 18 22:45:02 p6 kernel: Type: CD-ROM ANSI SCSI revision: 02 Jun 18 22:45:02 p6 kernel: Detected scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0 Jun 18 22:45:02 p6 kernel: (scsi1:0:6:0) Synchronous at 40.0 Mbyte/sec, offset 8. Jun 18 22:45:02 p6 kernel: Vendor: IBM Model: DDRS-39130W Rev: S92A Jun 18 22:45:02 p6 kernel: Type: Direct-Access ANSI SCSI revision: 02 Jun 18 22:45:02 p6 kernel: Detected scsi disk sda at scsi1, channel 0, id 6, lun 0 Jun 18 22:45:02 p6 kernel: (scsi1:0:8:0) Synchronous at 40.0 Mbyte/sec, offset 8. Jun 18 22:45:02 p6 kernel: Vendor: IBM Model: DDRS-39130W Rev: S97B Jun 18 22:45:02 p6 kernel: Type: Direct-Access ANSI SCSI revision: 02 Jun 18 22:45:03 p6 lpd: lpd startup succeeded Jun 18 22:45:02 p6 kernel: Detected scsi disk sdb at scsi1, channel 0, id 8, lun 0 Jun 18 22:45:02 p6 kernel: scsi : detected 2 SCSI cdroms 2 SCSI disks total. Jun 18 22:45:02 p6 kernel: Uniform CDROM driver Revision: 2.55 Jun 18 22:45:02 p6 kernel: sr1: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray Jun 18 22:45:02 p6 kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors= 17850000 [8715 MB] [8.7 GB] Jun 18 22:45:02 p6 kernel: SCSI device sdb: hdwr sector= 512 bytes. Sectors= 17850000 [8715 MB] [8.7 GB] Jun 18 22:45:02 p6 kernel: Partition check: Jun 18 22:45:02 p6 kernel: sda: sda1 sda2 < sda5 sda6 sda7 > Jun 18 22:45:02 p6 kernel: sdb: sdb1! sdb3 < sdb5 sdb6 sdb7 > < sdb8 sdb9 sdb10 > Jun 18 22:45:02 p6 kernel: NTFS version 990411 Jun 18 22:45:02 p6 kernel: VFS: Mounted root (ext2 filesystem) readonly. Jun 18 22:45:02 p6 kernel: Freeing unused kernel memory: 68k freed Jun 18 22:45:02 p6 kernel: Adding Swap: 120452k swap-space (priority -1) Jun 18 22:45:04 p6 nfs: Starting NFS services: succeeded Jun 18 22:45:02 p6 kernel: 3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html Jun 18 22:45:02 p6 kernel: eth0: 3Com 3c900 Boomerang 10baseT at 0xef00, 00:10:4b:d5:71:f9, IRQ 11 Jun 18 22:45:02 p6 kernel: 8K word-wide RAM 3:5 Rx:Tx split, autoselect/10baseT interface. Jun 18 22:45:02 p6 kernel: Enabling bus-master transmits and whole-frame receives. Jun 18 22:45:04 p6 nfs: rpc.statd startup succeeded Jun 18 22:45:05 p6 nfs: rpc.rquotad startup succeeded Jun 18 22:45:05 p6 nfs: rpc.mountd startup succeeded Jun 18 22:45:06 p6 nfs: rpc.nfsd startup succeeded Jun 18 22:45:06 p6 keytable: Loading keymap: Jun 18 22:45:06 p6 keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz Jun 18 22:45:06 p6 keytable: Loading system font: Jun 18 22:45:07 p6 rc: Starting keytable succeeded Jun 18 22:45:07 p6 sendmail: sendmail startup succeeded Jun 18 22:45:07 p6 gpm: gpm startup succeeded Jun 18 22:45:08 p6 httpd: httpd startup succeeded Jun 18 22:45:08 p6 PAM_pwdb[533]: (su) session opened for user xfs by (uid=0) Jun 18 22:45:09 p6 PAM_pwdb[533]: (su) session closed for user xfs Jun 18 22:45:09 p6 xfs: xfs startup succeeded Jun 18 22:45:10 p6 smb: smbd startup succeeded Jun 18 22:45:10 p6 smb: nmbd startup succeeded Jun 18 22:45:10 p6 linuxconf: Linuxconf final setup Jun 18 22:45:10 p6 rc: Starting linuxconf succeeded Jun 18 22:45:10 p6 rc: Starting local succeeded Jun 19 04:02:25 p6 kernel: attempt to access beyond end of device Jun 19 04:02:25 p6 kernel: 08:17: rw=2, want=1018676027, limit=4088511 Jun 19 04:02:25 p6 kernel: attempt to access beyond end of device Jun 19 04:02:25 p6 kernel: 08:17: rw=2, want=1026494214, limit=4088511 Jun 19 04:02:25 p6 kernel: attempt to access beyond end of device Jun 19 04:02:25 p6 kernel: 08:17: rw=2, want=1017447151, limit=4088511 Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1018676027, limit=4088511 Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1026494214, limit=4088511 Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1017447151, limit=4088511 Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1016766659, limit=4088511 Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1018676027, limit=4088511 Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1026494214, limit=4088511 Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1017447151, limit=4088511 Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1016766659, limit=4088511 Jun 19 04:02:26 p6 kernel: attempt to access beyond end of device Jun 19 04:02:26 p6 kernel: 08:17: rw=2, want=1024761062, limit=4088511 Jun 19 07:07:50 p6 kernel: (scsi1:-1:-1:-1) Referenced SCB 2 not valid during SELTO. Jun 19 07:07:50 p6 kernel: SCSISEQ = 0x5a SEQADDR = 0x7 SSTAT0 = 0x15 SSTAT1 = 0x8a Jun 19 07:08:05 p6 kernel: scsi : aborting command due to timeout : pid 46975, scsi1, channel 0, id 8, lun 0 Write (10) 00 00 93 92 23 00 00 02 00 Jun 19 07:08:05 p6 kernel: scsi : aborting command due to timeout : pid 46977, scsi1, channel 0, id 8, lun 0 Write (10) 00 00 b3 52 49 00 00 02 00 Jun 19 07:08:05 p6 kernel: scsi : aborting command due to timeout : pid 46978, scsi1, channel 0, id 8, lun 0 Write (10) 00 00 88 11 b2 00 00 02 00 Jun 19 07:08:05 p6 kernel: scsi : aborting command due to timeout : pid 46979, scsi1, channel 0, id 8, lun 0 Write (10) 00 00 88 2e c8 00 00 02 00 Jun 19 07:08:05 p6 kernel: SCSI host 1 abort (pid 46977) timed out - resetting Jun 19 07:08:05 p6 kernel: SCSI bus is being reset for host 1 channel 0. Jun 19 07:08:06 p6 kernel: (scsi1:0:8:0) Performing Domain validation. Jun 19 07:08:09 p6 kernel: (scsi1:0:8:0) Successfully completed Domain validation. Jun 19 07:08:09 p6 kernel: (scsi1:0:8:0) Synchronous at 40.0 Mbyte/sec, offset 8. Jun 19 07:08:09 p6 kernel: (scsi1:0:8:0) Performing Domain validation. Jun 19 07:08:09 p6 kernel: (scsi1:0:8:0) Successfully completed Domain validation. Jun 19 07:08:20 p6 kernel: SCSI host 1 abort (pid 46975) timed out - resetting Jun 19 07:08:20 p6 kernel: SCSI bus is being reset for host 1 channel 0. Jun 19 07:08:20 p6 kernel: SCSI host 1 channel 0 reset (pid 46975) timed out - trying harder Jun 19 07:08:20 p6 kernel: SCSI bus is being reset for host 1 channel 0. Jun 19 07:08:21 p6 kernel: SCSI host 1 reset (pid 46975) timed out again Jun 19 07:08:21 p6 kernel: probably an unrecoverable SCSI bus or device hang. Jun 19 07:08:25 p6 kernel: scsi : aborting command due to timeout : pid 46988, scsi1, channel 0, id 8, lun 0 Write (10) 00 00 88 11 b2 00 00 02 00
-- Paul Fulghum paulkf@austin.rr.com "what kind of party is this? there's no booze and only one hooker..." - Bender
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |