lkml.org 
[lkml]   [1999]   [Jun]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Writing driver for scanner

> > driven by an irq- and jumper-less interface card that sits in an ISA slot.
> > There's no SANE support for this device.
>
> What chip is on it ?

I'm puzzled. There are two chips on it, but all I can read on it is:

UT6264SC-70L, 6918 (first chip, 70ns -> memory chip?)
AT007, 9631PX005 (second chip, seems the controller)

The web shows up nothing for these numbers. OTOH, i noticed that there
*is* a dipswitch (4 switches) on it, connected directly into the second
chip.

Also, I checked Artec's homesite, and they DO talk about IRQ settings, so
i guess i might have been totally wrong there.

-- Nico

:: Nico Galoppo :: Linux - Free power for the masses : :: :::::.
:: ::
:: scratch at ace.ulyssis.student.kuleuven.ac.be ::
: http://hq.narfum.org/~scratch ::
. .::


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:52    [W:0.040 / U:1.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site