lkml.org 
[lkml]   [1999]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: sym/ncr53c8xx phase error still present in 2.2.7
Hi!

Shaw Carruthers (shaw@shawc.demon.co.uk),
"sym/ncr53c8xx phase error still present in 2.2.7":
> I did my monthly save under 2.2.7 and hit the phase error again, which I
> have been getting since late 2.1.xxx. Random disk data is corrupted and
> this time it took me a few hours to get the system back up.

I see similar problems with an NCR810A and an IBM DDRS 4.3G. I've removed
anything else from the bus, replaced all cables, switched to known good
terminators, disabled sync tarbsfer, queueing, disconnect. No luck. I tried
2.0.35, 2.2.[67] - if available with the sym83c8xx driver, too.

Replacing either disk (with an elderly 1G Seagate) or controller (with an
Adaptec 2940) solves the problem.

I tried to reproduce this with FreeBSD 2.2.6 and 3.0 - Problem disapeared.
It ran my stress test for 5 hours. Linux ran only between 5 minutes up to 2
hours stable.

Somehow I don't think it's hardware-related.



Rainer

--
KeyID=58341901 fingerprint=A5 57 04 B3 69 88 A1 FB 78 1D B5 64 E0 BF 72 EB


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:51    [W:0.094 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site