Messages in this thread | | | Date | Mon, 05 Apr 1999 08:50:51 +0000 | From | Gert van der Knokke <> | Subject | Re: Slow mouse with 2.2.2/2.2.3 SMP |
| |
Tom Holroyd wrote:
> On Sat, 3 Apr 1999, Gert van der Knokke wrote: > > >While running X and moving the mouse it (the mouse pointer) > >sometimes stops moving for a short moment and then continues > >again. At the moment the mouse pointer is moving again there is > >disk activity. > > Yea, I get the same thing on my UP Alpha 2.2.5, usually when the system > swaps something out it can get very unresponsive. But hey, it's busy. It > doesn't actually _lose_ the interrupts, because the mouse JUMPS to the > correct position afterwards. Same for you? >
Well, I did some testing and it seems to be related to the serial port I use. My guess is that both the extra serial ports I installed are somehow using the same IRQ although I've jumpered them to different IRQ's on the board.
I have two on-board serial ports (ttyS0/ttyS1), I now use the second for the mouse instead of one of the extra ports (ttyS2) and the problem is gone. On the fourth port I have a monitor/status display connected which is updated every minute. I noticed the mouse 'lockups' to be in-sync with the updates of this display. I used setserial to set the IRQ for the extra ports but I've read that setserial doesn't work anymore with kernels > 2.2.x ? How does one set the IRQ for these extra ports ? Or should the kernel autodetect them ?
The mouse now runs 'as smooth as silk' :)
Gert
-- ====================================================================== = LINUX = Unix The Next Generation ................................ = = gertk@rendo.dekooi.nl running Linux on AMD and Alpha = ======================================================================
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |