Messages in this thread | | | Date | Tue, 2 Mar 1999 09:31:32 +0000 | From | James Fidell <> | Subject | Re: 2.2.2ac5 aic7xxx problem |
| |
Quoting James Fidell (james@cloud9.co.uk):
> The machine works quite happily when disks are mounted from the first > controller, but as soon as I attempt to mount a disk on the second > controller I get these errors : > > kernel: scsi : aborting command due to timeout : pid 55961, scsi1, channel 0, id 4, lun 0 Write (6) 00 00 41 02 00 > kernel: scsi : aborting command due to timeout : pid 55962, scsi1, channel 0, id 4, lun 0 Read (6) 1c 40 87 02 00 > kernel: SCSI host 1 abort (pid 55962) timed out - resetting > kernel: SCSI bus is being reset for host 1 channel 0. > kernel: (scsi1:-1:-1:-1) Referenced SCB 0 not valid during SELTO. > kernel: SCSISEQ = 0x5a SEQADDR = 0x8 SSTAT0 = 0x10 SSTAT1 = 0x88 > > The last two lines repeat many times until the machine panics.
Looks like this works fine again in ac7, so I'll stop looking for the problem now.
James. -- "Yield to temptation -- | Consultancy: james@cloud9.co.uk it may not pass your way again" | http://www.cloud9.co.uk/james | - Lazarus Long | James Fidell
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |