lkml.org 
[lkml]   [1999]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.3.34 ide-cdrom error

That is because I have the noise level set high to figure out the final
design for the init process. It is obvious that I have a few adjustments
to make.

On Thu, 23 Dec 1999, Ted Sikora wrote:

> Following error still exists in 2.3.34 ide cdrom:
>
> hdc: ide_wait_noerr: status=0x51 { DriveReady SeekComplete Error }
> hdc: ide_wait_noerr: error=0x04
> hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error
> }
> hdc: set_drive_speed_status: error=0x04
> hdc: ATAPI 5X CD-ROM drive, 240kB Cache
> Uniform CD-ROM driver Revision: 3.06
>
> 2.2.13/2.2.14pre.x kernels are fine.
>
> --
> Ted Sikora
> Jtl Development Group
> tsikora@powerusersbbs.com
> http://powerusersbbs.com
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.rutgers.edu
> Please read the FAQ at http://www.tux.org/lkml/
>

Andre Hedrick
The Linux IDE guy


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:55    [W:0.167 / U:1.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site