lkml.org 
[lkml]   [1999]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: 2.2.13 & high network load
Date
In article <cistron.Pine.LNX.4.10.9912141729450.13807-100000@eos.dobrich.net>,
<vasil@eos.dobrich.net> wrote:
> Hello,
>I have a problem with stock 2.2.13.I have a machine that serves web traffic
>at about 10Mbps (as mrtg says),and recently,with the bandwith increase from
>5 to 10 Mbit I had interesting problems - after about 14 hours of serving
>trafic at about 10Mbit,the machine stopped responding to pings.

I've seen this with the tulip, epic100 and eepro100 drivers. You're
seeing it with:

>3c59x.c:v0.99H 11/17/98 Donald Becker
>http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
>eth0: 3Com 3c905B Cyclone 100baseTx at 0xec00, 00:10:4b:d3:b0:44, IRQ 9

All of these drivers were written by Donald Becker. One or 2 weeks
ago someone found a basic mistake in most of the drivers from Donald,
and posted patches for the tulip driver. Someone else posted a pointer
to a new eepro100 driver, which I am using now and which works fine
without locking up. Hopefully Donald is following this list and will
fix his drivers .. both 2.2.1X and 2.3.x really need those fixes.

Mike.
--
The From: and Reply-To: addresses are internal news2mail gateway addresses.
Reply to the list or to miquels@cistron.nl (Miquel van Smoorenburg)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:55    [W:0.068 / U:1.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site