Messages in this thread | | | Date | Wed, 3 Nov 1999 17:19:09 +0100 (CET) | From | Enrico Demarin <> | Subject | Re: Intel EEPRO 10/100 problems on 2.2.13 |
| |
I just found it (?)
I set in the BIOS to initialize cards for Windows 95 (TM) OS.
Why did it work this way and not with Non-Plugnplay OS, i dont know.
enrico
On Wed, 3 Nov 1999, Enrico Demarin wrote:
> > Hi , > > i have a problem getting linux to see what appears to be an onboard > Intel EtherExpress Pro 10/100 on a Digital Prioris XL 6200 server, > (PentiumPRO 200), > > It appears to see the card but apparently it doesnt assign an IRQ. > > The kernel i used is vanilla 2.2.13, the driver is not > compiled as a module. > > I tried getting a "testing" driver from > ftp://cesdis.gsfc.nasa.gov/linux/drivers/testing > > but the result are worse ( the kernel hangs on boot) > > what can i do ? > (apart from getting another card =) > > enrico > > > > this is what it gives me at boot : > > sktr.c: v1.01 08/29/97 by Christoph Goos > Found Intel i82557 PCI Speedo at I/O 0x5800, IRQ 0. > The PCI BIOS has not enabled this device! Updating PCI command 0001->0005. > PCI latency timer (CFLT) is 0x42. > eepro100.c:v1.06 10/16/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html > eth0: Intel EtherExpress Pro 10/100 at 0x5800, 00:A0:C9:60:20:84, IRQ 0. > Board assembly 645520-034, Physical connectors present: RJ45 > Primary interface chip DP83840 PHY #1. > DP83840 specific setup, setting register 23 to 8462. > General self-test: passed. > Serial sub-system self-test: passed. > Internal registers self-test: passed. > ROM checksum self-test: passed (0x49caa8d6). > Receiver lock-up workaround activated. > eepro100.c:v1.06 10/16/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html > > > Output of /proc/pci : > > > PCI devices found: > Bus 0, device 0, function 0: > Host bridge: Intel 82441FX Natoma (rev 2). > Medium devsel. Fast back-to-back capable. Master Capable. Latency=64. > Bus 0, device 10, function 0: > Ethernet controller: Intel 82557 (rev 2). > Medium devsel. Fast back-to-back capable. Master Capable. Latency=66. Min Gnt=8.Max Lat=56. > Prefetchable 32 bit memory at 0x0 [0x8]. > I/O at 0x5800 [0x5801]. > Bus 0, device 13, function 0: > SCSI storage controller: Adaptec AIC-7880U (rev 0). > Medium devsel. Fast back-to-back capable. IRQ 11. Master Capable. Latency=64. Min Gnt=8.Max Lat=8. > I/O at 0xfc00 [0xfc01]. > Non-prefetchable 32 bit memory at 0xfe9ff000 [0xfe9ff000]. > Bus 0, device 18, function 0: > ISA bridge: Intel 82371SB PIIX3 ISA (rev 1). > Medium devsel. Fast back-to-back capable. Master Capable. No bursts. > Bus 0, device 18, function 1: > IDE interface: Intel 82371SB PIIX3 IDE (rev 0). > Medium devsel. Fast back-to-back capable. Master Capable. Latency=64. > I/O at 0xffa0 [0xffa1]. > Bus 0, device 20, function 0: > VGA compatible controller: Cirrus Logic GD 5430 (rev 34). > Medium devsel. > Prefetchable 32 bit memory at 0xfb000000 [0xfb000008]. > >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |