Messages in this thread | | | From | "Paul Fulghum" <> | Subject | Re: 2.3.21 APIC error interrupts | Date | Thu, 14 Oct 1999 12:01:23 -0500 |
| |
I'm seeing this same message, but *only* on shutdown after the console gets the message:wait while rebooting. Started with 2.3.20. This is a dual PII-400 machine, the message occurs for both CPUs and ESR0 is 0 and ESR1 is 0x40 for both CPUs.
Paul Fulghum paulkf@microgate.com Microgate Corporation www.microgate.com 9501 Capital of Texas Hwy Austin, Texas 78759 (512)-345-7791
From: Maciej W. Rozycki <macro@ds2.pg.gda.pl> > On Tue, 12 Oct 1999, Eric Dittman wrote: > > > With 2.3.21 I keep getting the following messages: > > > > Oct 12 10:48:58 narnia kernel: APIC error interrupt on CPU#0, should never happen. > > Oct 12 10:48:58 narnia kernel: ... APIC ESR0: 00000004 > > Oct 12 10:48:58 narnia kernel: ... APIC ESR1: 00000002 > > Your board probably works under marginal conditions. Bits #0 and #1 in > ESR mean APIC bus transmit/receive checksum errors and bits #2 and #3 mean > transmit/receive accept errors. All of these usually indicate serious > problems with hardware. > > > I get a whole lot more of these every so often. I didn't see these on > > earlier versions of 2.3.xx (but I skipped from 2.3.18ac10 to 2.3.21). > > Logging of these errors was only introduced in 2.3.20.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |