lkml.org 
[lkml]   [1999]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: hdc: IRQ probe failed(0) in 2.3.20
swoop wrote:
>
> Just check in BIOS for disabled IRQ allocation. THis solved problem. I
> have had a USB IRQ Disabled. After enabled it worked fine.
>
Nope, my USB controller is enabled. Its assigning the IRQ to my AGP
video card. The BIOS has an option to assign IRQs to PCI video cards,
not AGP ones (Do AGP cards even support interrupts?) I'm going to try
commenting out the line which actually changed the IRQ, but won't have
time until tomorrow at least.

As another datapoint, when I do boot (after I make my CDROM no longer
mount on bootup), /proc/interrupts shows the correct values for my ide
controllers.

Bradley

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:54    [W:0.394 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site