Messages in this thread | | | Date | Sun, 10 Oct 1999 19:39:16 +0200 (CEST) | From | Peter Hanecak <> | Subject | Re: 2.2.13pre13 chronic oops |
| |
On 9 Oct 1999, Jarno Paananen wrote:
> I'm seeing a bit of a pattern here. I also have 2940U2W SCSI > adapter and Peter Hanecak also had SCSI, didn't mention the > adapter type though. If it's also Adaptec, we might have a > common denominator here, if not, it could be the SCSI-layer itself. > I also have eepro, but it should matter, should it? :) I Cc:ed > the Adaptec driver maintainer if he could be of help here.
i'm using BusLogic. wow, now i can't remember vendor so just this have to be ebought:
scsi: ***** BusLogic SCSI Driver Version 2.1.15 of 17 August 1998 ***** scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com> scsi0: Configuring BusLogic Model BT-930 PCI Ultra SCSI Host Adapter scsi0: Firmware Version: 5.02, I/O Address: 0x6800, IRQ Channel: 12/Level scsi0: PCI Bus: 0, Device: 14, Address: 0xE2000000, Host Adapter SCSI ID: 7 scsi0: Parity Checking: Enabled, Extended Translation: Enabled scsi0: Synchronous Negotiation: Fast, Wide Negotiation: Disabled scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled scsi0: Driver Queue Depth: 255, Scatter/Gather Limit: 128 segments scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3 scsi0: Error Recovery Strategy: Default, SCSI Bus Reset: Enabled scsi0: SCSI Bus Termination: Enabled, SCAM: Enabled, Level 1 scsi0: *** BusLogic BT-930 Initialized Successfully *** scsi0 : BusLogic BT-930
hany
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |