lkml.org 
[lkml]   [1999]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: Ifconfig TX errors
In <15530768704284@editel.com.br> Alexandre Hautequest (hquest@linuxbr.com.br) wrote:
> Hi all.

> My DEC 21140 network card is telling me the following (with tulip module
> loaded):

> fox:/root# ifconfig eth0
> eth0 Link encap: Ethernet HWaddr 00:00:E8:24:7A:38
> inet addr:1.5.112.0 Bcast:1.255.255.255 Mask:255.0.0.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:2175 erros:0 dropped:0 overruns:0 frame:1
> TX packets:0 errors:18745 dropped:144 overruns:0 carrier:0
> coll:0
> Interrupt:10 Base address:0xf480

> fox:/root# uptime
> 13:43pm up 13 min, 1 user, load average:0.00, 0.02, 0.02
> fox:/root# lsmod
> Module Size Used by
> tulip 25076 1
> fox:/root# _

> I can ping, telnet, browse the web, etc.

> Is there something i forget to do or something i need to do? I've enabled
> the full-duplex of the card.

> The configuration is basically the same as 2.0.36 (and work in this).

You need new ifconfig. That's all.




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:49    [W:0.177 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site