lkml.org 
[lkml]   [1999]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: ATAPI CDRom Error
Alan Cox wrote:

> You drive got stuck and reported that to Linux. Linux duely logged it. Looks
> good to me.

What I meant was that these VFS: disk change reported type messages happen any
time I do a `cdcd eject` with the drive, as opposed to only when there was a
hardware failure. Here's the tail of my dmesg:

registered device ppp0
VFS: Disk change detected on device ide1(22,0)
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x40
ATAPI device hdc:
Error: Hardware error -- (Sense key=0x04)
(vendor-specific error) -- (asc=0xb6, ascq=0x00)
The failed "Start Stop Unit" packet command was:
"1b 00 00 00 02 00 00 00 00 00 00 00 "
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,0)
PPP Deflate Compression module registered

Those VFS messages are just from me popping cd's in and out using cdcd.

m.

--
"Plausibility is just what it does have, Crito, rather than truth."
-- Socrates, Euthydemus

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.rutgers.edu
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:50    [W:0.149 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site