lkml.org 
[lkml]   [1999]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 2.2.0-pre2 seems faster than 2.1.132, but SCSI problem?


    On Sun, 3 Jan 1999, Jorg Schuler wrote:

    > I used the old driver ncr538/7xx to do the inquiries. If it helps I still

    The inquiry data from your devices seem correct.

    > volunteer to crash my SCSI-bus again using the new driver and xcdroast
    > and/or write to /dev/st0. Then I would boot off an IDE-drive to keep the
    > system from hanging and to be able to record all the error messages.

    Thanks for helping debug the thing.

    You may also enable some debugging messages in drivers.
    The st driver needs to be recompiled with DEBUG defined. For the
    ncr53c8xx you can send the following command at run time before
    starting your tests:
    echo "setdebug phase result nego tags" >/proc/scsi/ncr53c8xx/0
    You may also try to get some debug outputs from scsi.c, but this probably
    will populate you log too much and make things ununderstandable.

    You may just do 2 tests, one with minimal output messages and another
    one will full debug messages and report me the outputs.

    Regards,
    Gerard.



    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.rutgers.edu
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:49    [W:6.098 / U:0.504 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site