Messages in this thread | | | Date | Thu, 21 Jan 1999 13:46:19 -0800 (PST) | From | David Whysong <> | Subject | Re: Are WDC AC33100H & AC31600H DMA-safe? |
| |
On Thu, 21 Jan 1999, Koby Kahane wrote:
>I have recently upgraded from 2.0.36 to 2.2.0-pre9 > >I've noticed that my boot messages say that DMA is disabled for my >2nd and 3rd hard disks. Is it safe for me to enable DMA (via hdparm) >for these drive models or should I stick to none-DMA mode?
I don't know about the AC33100H, but my AC31600H has worked perfectly with DMA for about 3 years. I don't know why it has been blacklisted...
[root@Sleepy dwhysong]# grep '/dev/hdb' /etc/rc.d/rc.local hdparm -m16 -u1 -c1 -d1 /dev/hdb
[root@Sleepy dwhysong]# hdparm -i /dev/hdb
/dev/hdb:
Model=WDC AC31600H, FwRev=23.16U73, SerialNo=WD-WT289 Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq } RawCHS=3148/16/63, TrkSize=57600, SectSize=600, ECCbytes=22 BuffType=3(DualPortCache), BuffSize=128kB, MaxMultSect=16, MultSect=16 DblWordIO=no, maxPIO=2(fast), DMA=yes, maxDMA=0(slow) (maybe): CurCHS=787/64/63, CurSects=3173184, LBA=yes, LBAsects=3173184 tDMA={min:120,rec:120}, DMA modes: mword0 mword1 *mword2 IORDY=on/off, tPIO={min:160,w/IORDY:120}, PIO modes: mode3 mode4
[root@Sleepy dwhysong]# hdparm /dev/hdb
/dev/hdb: multcount = 16 (on) I/O support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 787/64/63, sectors = 3173184, start = 0
Dave
David Whysong dwhysong@physics.ucsb.edu Astrophysics graduate student University of California, Santa Barbara PGP public keys available at http://www.physics.ucsb.edu/~dwhysong/pgpkey.asc DSS PGP Key 0x903F5BD6 : FE78 91FE 4508 106F 7C88 1706 B792 6995 903F 5BD6 D-H PGP key 0x5DAB0F91 : BC33 0F36 FCCD E72C 441F 663A 72ED 7FB7 5DAB 0F91
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.rutgers.edu Please read the FAQ at http://www.tux.org/lkml/
| |