Messages in this thread | | | Date | Wed, 9 Jul 1997 04:24:39 -0400 (EDT) | From | Jon Lewis <> | Subject | Re: SCSI Autoloaders |
| |
On Wed, 9 Jul 1997, B. James Phillippe wrote:
> Greetings, > > I have been poking around in the manpages for mt(1) and st(4), and > linux/drivers/scsi/README.st, and I don't see any ioctl for switching > tapes in an autoloader. I recently purchased a Seagate 4586NP SCSI-2 DAT > autoloader recognized as: > > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: ARCHIVE Model: Python 28849-XXX Rev: 5.AC > Type: Sequential-Access ANSI SCSI revision: 02
available from ftp://dandelion.com
MTX - SCSI Tape Attached Medium Changer Control Program
Version 1.0 Beta for Linux
BETA RELEASE
7 March 1997
Leonard N. Zubkoff Dandelion Digital lnz@dandelion.com
Copyright 1997 by Leonard N. Zubkoff <lnz@dandelion.com>
INTRODUCTION
The MTX program controls the robotic mechanism in DDS Autoloaders such as the Seagate 4586NP (Archive Python 28849-XXX). ...
------------------------------------------------------------------ Jon Lewis <jlewis@fdt.net> | Unsolicited commercial e-mail will Network Administrator | be proof-read for $199/message. Florida Digital Turnpike | ________Finger jlewis@inorganic5.fdt.net for PGP public key_______
| |