Messages in this thread | | | Date | Sun, 25 May 1997 23:47:07 -0700 (PDT) | From | "Mr. James W. Laferriere Network Engineer" <> | Subject | Re: Linux CM for 2.0.30 |
| |
Hello David,
I just found time to be able to play around with the CM. I am probably doing someting very silly here but,
If I try to 'more /proc/cm/devices' the VT I am using will clear and display a few lines then halt. No ammount of ^C will stop the more. Doing a ^'scroll-lock' shows that more is still running but has a '-' sign in front of its PID in the output, The real trouble is that None of the other VT's are able to respond either. I beleive that more (or cat, I tried both) seem to be using all of the system trying to get data from /proc/cm/devices .
I'll try a 'top' running at the same time & see if it can capture the troiuble before all the system gets used.
OUCH, I stand corrected the above happpened twice, But without running 'top -d1' Now I get the one or the other of the appended Oops , What is really odd is that the value in the EIP isn't even close to anything in my System.map file my file ends at 0020b9b5 . :-{
On Fri, 23 May 1997, David Howells wrote: > Due to popular request, I've done a port of my Configuration Manager to Linux > 2.0.30. To get it from my mail responder: > > To: dwh@nexor.co.uk > Subject: fetch cfgmgr022-2030 > > Alternatively, I have a web page at: > http://lucifer.hemmet.s-hem.chalmers.se/~dwh > > Note that I couldn't ESCD read support to work with this kernel version, so > that feature is disabled. > > All the best, > David Howells
Tia, JimL +-----------------------------------------------------------------------+ | James W. Laferriere - Network Engineer - babydr@nwrain.net | | System Techniques - 25416 - 22nd S. - Kent, WA 98032 | | Give me VMS -or- Give me Linux -but- only on AXP | +-----------------------------------------------------------------------+ |-> Linux-Vax Port, Still in Progress . IE: No Progress To Report ;-) <-| +-----------------------------------------------------------------------+ My System & Libraries & Programs status, At this time are: ----------------------------------------------------------- AMD-5k86-P90 , 64MB Main memory , 512K L2 Cache. no-name M.B. , pci & isa slots , Triton chipset pci1-SVGA-gd5446 , pci2-Asus-SC200 , pci3-Asus-SC200 pci4-Eepro100b , ----------------------------------------------------------- Linux-2.0.30 , eepro100.c/ v0.32 08/04/97 in kernel. , ncr53c8xx.c/ v1.18h 01/05/97 in kernel. Gcc v. 2.7.2 ; binutils-2.6.0.14 ; sysvinit-2.62 ld.so.1.7.14 ; libc.so.5.3.12 ; libc.so.4.7.6 libg++.so.27.1.4 ; proc-ps 0.99 ; net-tools 1.2.0 ; mount-2.5j Modules 2.0.0 ; loadkeys 0.89 ; yacc-1.8 Flex 2.5.3 ; e2fsprogs-1.09 -----------------------------------------------------------
tty00 at 0x03f8 (irq = 4) is a 16550A tty01 at 0x02f8 (irq = 3) is a 16550A lp1 at 0x0378, (polling) Ramdisk driver initialized : 16 ramdisks of 0K size ide: i82371 PIIX (Triton) on PCI bus 0 function 57 ide: ports are not enabled (BIOS) Floppy drive(s): fd0 is 1.44M Started kswapd v 1.4.2.2 FDC 0 is a post-1991 82077 ncr53c8xx: at PCI bus 0, device 18, function 0 ncr53c8xx: unit=0 chip=810 rev=0x12 base=0xf1102000, io_port=0x6000, irq=10 ncr53c810-0: restart (scsi reset). ncr53c8xx: at PCI bus 0, device 19, function 0 ncr53c8xx: unit=1 chip=810 rev=0x11 base=0xf1100000, io_port=0x6100, irq=11 ncr53c810-1: restart (scsi reset). scsi0 : ncr53c8xx - revision 1.18h scsi1 : ncr53c8xx - revision 1.18h scsi : 2 hosts. Vendor: Quantum Model: XP31070W Rev: L912 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: QUANTUM Model: FIREBALL_TM2110S Rev: 300X Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0 Vendor: RODIME Model: RO3000T Rev: 5.75 Type: Direct-Access ANSI SCSI revision: 01 CCS Detected scsi disk sdc at scsi1, channel 0, id 0, lun 0 Vendor: EXABYTE Model: EXB-8200 Rev: 262Z Type: Sequential-Access ANSI SCSI revision: 01 Detected scsi tape st0 at scsi1, channel 0, id 4, lun 0 Vendor: PIONEER Model: CD-ROM DR-124X Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi1, channel 0, id 6, lun 0 scsi : detected 1 SCSI tape 1 SCSI cdrom 3 SCSI disks total. ncr53c810-0-<0,0>: FAST SCSI-2 10.0 MB/s (100 ns, offset 8) SCSI device sda: hdwr sector= 512 bytes. Sectors= 2203480 [1075 MB] [1.1 GB] ncr53c810-0-<1,0>: FAST SCSI-2 10.0 MB/s (100 ns, offset 8) SCSI device sdb: hdwr sector= 512 bytes. Sectors= 4124736 [2014 MB] [2.0 GB] SCSI device sdc: hdwr sector= 512 bytes. Sectors= 410211 [200 MB] [0.2 GB] tunnel: version v0.2b2 PPP: version 2.2.0 (dynamic channel allocation) TCP compression code copyright 1989 Regents of the University of California PPP Dynamic channel allocation code copyright 1995 Caldera, Inc. PPP line discipline registered. Found Intel i82557 PCI Speedo at I/O 0x6200, IRQ 12. PCI latency timer (CFLT) is 0x20. eepro100.c:v0.32 4/8/97 Donald Becker linux-eepro100@cesdis.gsfc.nasa.gov eth0: Intel EtherExpress Pro 10/100 at 0x6200, 00:A0:C9:2B:F0:FD, IRQ 12. Board assembly 352509-003, Physical connectors present: RJ45 Primary interface chip DP83840 PHY #1. DP83840 specific setup, setting register 23 to 8462. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x49caa8d6). Operating in half duplex mode. Reciever lock-up workaround activated. eepro100.c:v0.32 4/8/97 Donald Becker linux-eepro100@cesdis.gsfc.nasa.gov Partition check: sda: sda1 sda2 sdb: sdb1 sdb2 sdc: sdc1 VFS: Mounted root (ext2 filesystem) readonly. Adding Swap: 130748k swap-space (priority 2120) eth0: speedo_open() irq 12. eth0: Done speedo_open(), status 00000090.
general protection: 0000 CPU: 0 EIP: 0010:[<002972bb>] EFLAGS: 00010282 eax: 00e0e0ff ebx: 0285e000 ecx: 00000000 edx: 0285e000 esi: 001dbd34 edi: 02175541 ebp: 00001000 esp: 02833f58 ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018 Process cat (pid: 103, process nr: 29, stackpage=02833000) Stack: 0285e000 02833f90 00000000 00000c00 00000000 02175540 00000000 00001000 025f82f4 0285f065 00000c00 001dbd34 00000000 0285e000 0285e000 001297aa 025f82f4 02175540 08002b30 00001000 027f8810 08002b30 00000003 bffffa78 Call Trace: [<001297aa>] [<0010a852>] Code: 00 84 72 29 00 d4 7a 40 02 00 20 00 00 00 00 00 00 01 00 00
---- OR this one ----
Unable to handle kernel paging request at virtual address c44a8e5d current->tss.cr3 = 02757000, %cr3 = 02757000 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[<002972bb>] EFLAGS: 00010206 eax: 00e0e0e0 ebx: 02747000 ecx: 00000000 edx: 02747000 esi: 001dbd34 edi: 02166880 ebp: 00001000 esp: 027f0f38 ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018 Process cat (pid: 109, process nr: 29, stackpage=027f0000) Stack: 02166880 001dbd34 00001000 027f0f58 02747000 02747000 00000000 000006e0 02747000 027f0f90 00000000 00000c00 00000000 02166880 00000000 00001000 027e6dc8 027d6065 00000c00 001dbd34 00000000 02747000 02747000 001297aa Call Trace: [<001297aa>] [<0010a852>] Code: 00 4c 7e 29 00 d0 6b 40 02 00 30 00 00 fc da 28 00 01 00 00
| |