lkml.org 
[lkml]   [1996]   [Apr]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: 1.3.89 BusLogic driver problem
    Date
    > 


    Hmm.. I also had a scsi error yesterday under 1.3.89, but I'm using
    an NCR 53c510 PCI ( I think thats the right model # ;). Never had
    one before.



    >
    > >> "TANAKA" == TANAKA Yoshitomo <serow@silkwood.rim.or.jp> writes:
    >
    > TANAKA> I just update 1.3.88 to 1.3.89 and BusLogic driver fails to
    > TANAKA> initializing. Boot up console shows following.
    >
    > I have exactly same problem with BT-946C host adapter.
    >
    > My SCSI devices is following.
    >
    > >Attached devices:
    > >Host: scsi0 Channel: 00 Id: 00 Lun: 00
    > > Vendor: QUANTUM Model: EMPIRE_1080S Rev: 1220
    > > Type: Direct-Access ANSI SCSI revision: 02
    > >Host: scsi0 Channel: 00 Id: 02 Lun: 00
    > > Vendor: RICOH Model: RO-3020E Rev: 2230
    > > Type: Optical Device ANSI SCSI revision: 02
    > >Host: scsi0 Channel: 00 Id: 06 Lun: 00
    > > Vendor: TOSHIBA Model: CD-ROM XM-3501TA Rev: 2694
    > > Type: CD-ROM ANSI SCSI revision: 02
    >
    > Hmm, I have same HDD EMPIRE_1080S.
    >
    > **
    >
    > I have had a problem with 1.3.1 driver.
    > I cannot Enable Tagged Queueing
    >
    > When Enable Tagged Queueing ( on 1.3.88 ), Boot Up console shows
    > following errors...
    >
    > >scsi : aborting command due to timeout : pid 11465, scsi0, channel 0, id 0, lun 0 0x08 06 0a 9e 10 00
    > >scsi0: Pausing briefly to see if CCB #11470 to Target 0 will complete
    > >scsi0: Aborting CCB #11470 to Target 0
    > >scsi : aborting command due to timeout : pid 11466, scsi0, channel 0, id 0, lun 0 0x08 06 0a ae 38 00
    > >scsi0: Pausing briefly to see if CCB#11471 to Target 0 will complete
    > >scsi0: Aborting CCB #11471 to Target 0
    > >SCSI host 0 abort (pid 11465) timed out - resetting
    > >SCSI bus is being reset for host 0.
    > >scsi0: Sending Bus Device Reset CCB#11473 to Target 0
    > >scsi0: Tagged Queuing now disabled for Target 0
    > >SCSI host 0 abort (pid 11466) timedout - resetting
    > >SCSI bus is being reset for host 0.
    > >scsi0: Resetting BusLogic BT-946C dueto Target 0
    > >scsi0: *** BusLogic BT-946C
    > >Initialized Successfully ***
    >
    > Anyone have or had same problems?
    >
    > ---daisuke
    >
    > *-------------------------------------------------------------------------*
    > _/_/_/_/ Daisuke SUZUKI @ Ochimizu Software Engineering Labolatory
    > _/ AIST mailto: daisuke@jaist.ac.jp, gfh02712@niftyserve.or.jp
    > _/ Hokuriku http://www.jaist.ac.jp/~daisuke/Linux/index-e.html
    > O_/ Japan Advanced Institute of Science and Technology, Hokuriku 1990
    >
    >


    --
    -----------------------------------------------------------------------
    Dr. Delete, Ph.D. (doc@NetWare.is.LaMe.ORG) ---------------------------
    "You can't understand the user's mind" --------------------------------
    "But try with your books and degrees" ---------------------------------
    "If you let yourself go and open your mind" ---------------------------
    "I bet you'd be doing like me.... and it ain't so bad" ----------------
    Alice In Chains, "Dirt", "Junkhead (track 7)" -------------------------
    -----------------------------------------------------------------------


    \
     
     \ /
      Last update: 2005-03-22 13:37    [W:4.083 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site