This message generated a parse failure. Raw output follows here. Please use 'back' to navigate. From devnull@lkml.org Sat Jun 1 16:50:35 2024 Received: from orchard.washtenaw.cc.mi.us (orchard.washtenaw.cc.mi.us [198.111.176.4]) by herbie.ucs.indiana.edu (8.6.12/8.6.12) with ESMTP id DAA26053 for ; Mon, 15 Apr 1996 03:23:57 -0500 Received: from vger.rutgers.edu by orchard.washtenaw.cc.mi.us (8.6.10/2.3) with ESMTP id EAA27722; Mon, 15 Apr 1996 04:22:31 -0400 Received: by vger.rutgers.edu id <105998-25471>; Mon, 15 Apr 1996 04:14:09 -0500 Message-Id: X-Mailer: exmh version 1.6.6 3/24/96 To: linux-kernel@vger.rutgers.edu Cc: boris@vger.rutgers.edu Subject: Oops in 1.3.88 (long) X-Face: /oPa9&>MzRQq:oe:KFDqh`?,A~:^^dQc@_j1\.3_#&uU,ZroMeAm*1b[='dus\zkT9z+zGPg-t$4Df&r$kErI`X4Y-P9C"Wq`DNe|]X&}pMjByAA,+FqpCflJ/H.+n.Fa+1%*U8.Zu/Q/gR1j Sender: owner-linux-kernel@vger.rutgers.edu Precedence: bulk This is a multipart MIME message. --===_0________15_07:53:57_MSD_1996 Content-Type: text/plain; charset=us-ascii Hello, here they are. First one occured during boot, others when I tried to re-run diald's. Each one is followed by ksympops listing. Hope someone can figure out something from that :) Here's what I got from "cat /proc/modules" after that: slip 2 [slip] 1073741821 ip_alias 1 1 (autoclean) emumodule 3 0 syscallmgr 1 [emumodule] 1 sbpcd 14 0 sound 25 0 umsdos 5 1 (autoclean) msdos 2 [umsdos] 1 (autoclean) fat 6 [umsdos msdos] 1 (autoclean) raid0 1 1 (autoclean) --===_0________15_07:53:57_MSD_1996 Content-Type: text/plain; charset=us-ascii Content-Description: 0 Linux version 1.3.88 (root@xtalk.msk.su) (gcc version 2.7.2) #23 Sat Apr 13 21:33:32 MSD 1996 Serial driver version 4.11a with no serial options enabled tty01 at 0x02f8 (irq = 3) is a 16450 tty02 at 0x03e8 (irq = 4) is a 16450 tty03 at 0x02e8 (irq = 3) is a 16450 hda: Maxtor 7213 AT, 202MB w/64kB Cache, CHS=683/16/38 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 md driver 0.34 MAX_MD_DEV=4, MAX_REAL=8 ncr53c8xx : at PCI bus 0, device 17, function 0 ncr_attach: unit=0 chip=810 base=ffbdff00, io_port=fc00, irq=11 ncr53c810-0: using memory mapped IO at virtual address 0x1811f00 ncr53c810-0: requesting shared irq 11 (dev_id=0x21c064) ncr53c810-0: restart (scsi reset). scsi0 : ncr53c8xx (rel 1.8) scsi : 1 host. Started kswapd v 1.4.2.2 Vendor: CONNER Model: CP30540 SUN0535 Rev: B0BB Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: QUANTUM Model: MAVERICK 540S Rev: 0905 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0 Vendor: ARCHIVE Model: VIPER 150 21247 Rev: -013 Type: Sequential-Access ANSI SCSI revision: 01 scsi : detected 2 SCSI disks total. ncr53c810-0-: FAST SCSI-2 100ns (10 Mb/sec) offset 8. SCSI device sda: hdwr sector= 512 bytes. Sectors= 1065912 [520 MB] [0.5 GB] ncr53c810-0-: FAST SCSI-2 100ns (10 Mb/sec) offset 8. SCSI device sdb: hdwr sector= 512 bytes. Sectors= 1057758 [516 MB] [0.5 GB] Partition check: sda: sda1 sda2 sdb: sdb1 sdb2 hda: hda1 hda2 VFS: Mounted root (ext2 filesystem) readonly. REGISTER_DEV sda1 to md0 done REGISTER_DEV sdb1 to md0 done raid0 personality registered START_DEV md0 raid0 Adding Swap: 25580k swap-space Adding Swap: 25580k swap-space UMSDOS Beta 0.6 (compatibility level 0.4, fast msdos) sbpcd-0 [01]: sbpcd.c v4.2 Eberhard Moenkeberg sbpcd-0 [02]: Scanning 0x330 (LaserMate)... sbpcd-0 [03]: Drive 0 (ID=0): CR-563 (0.75) at 0x330 (type 0) Syscall_Modul, init_module called, NR_resolve_syscall=255 sbpcd-1 [04]: Drive 1 (ID=1): CR-563 (0.75) at 0x330 (type 0) vm86-module, init_module called emusys, syscall installed, NR_emusys=217 sbpcd-2 [05]: Drive 2 (ID=2): CR-563 (0.75) at 0x330 (type 0) sbpcd-3 [06]: Drive 3 (ID=3): CR-563 (0.75) at 0x330 (type 0) CSLIP: code copyright 1989 Regents of the University of California SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256) (6 bit encapsulation enabled). SLIP linefill/keepalive option. Unable to handle kernel NULL pointer dereference at virtual address c0000018 current->tss.cr3 = 011c7000, %cr3 = 011c7000 *pde = 00102067 *pte = 00000027 Oops: 0000 CPU: 0 EIP: 0010:[<0185c017>] EFLAGS: 00010202 eax: 0138a018 ebx: 011f2a0c ecx: 0138a010 edx: 000000c0 esi: 00000484 edi: 00000480 ebp: 00000010 esp: 002a4e98 ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018 Process diald (pid: 133, process nr: 12, stackpage=002a4000) Stack: 011f2a0c 00000484 00000480 011f2a98 00000480 011f2a98 002cc000 00173005 002cc930 001a4654 ffaa0055 00000246 0185c6ce 00000010 00000010 011f2a0c 011f2a98 011f2b78 002cc000 0185ca2b 011f2a98 002a4f20 001c5ee8 011a1158 Call Trace: [<00173005>] [<0185c6ce>] [<0185ca2b>] [<0016837c>] [<0016be70>] [<0016be40>] [<0016a8f0>] [<0016a990>] [<0016bf70>] [<0016c6f0>] [<00172960>] [<0016bbf0>] [<0016c8e0>] [<0016aff0>] [<0016bb60>] [<0016a23b>] [<0012e8c7>] [<0010a509>] Code: 8b 4d 08 89 4c 24 2c 0f b7 41 3e 01 c0 89 44 24 1c 3d 7f 04 ncr53c810-0-: using tagged command queueing, up to 4 cmds/lun sbpcd-0 [07]: data buffer size: 8 frames. sbpcd-1 [08]: data buffer size: 8 frames. sbpcd-2 [09]: data buffer size: 8 frames. sbpcd-3 [10]: data buffer size: 8 frames. --===_0________15_07:53:57_MSD_1996 Content-Type: text/plain; charset=us-ascii Content-Description: 0.sym Using `../System.map' to map addresses to symbols. Trace: 173005 Trace: 185c6ce Trace: 185ca2b Trace: 16837c Trace: 16be70 Trace: 16be40 Trace: 16a8f0 Trace: 16a990 Trace: 16bf70 Trace: 16c6f0 Trace: 172960 Trace: 16bbf0 Trace: 16c8e0 Trace: 16aff0 Trace: 16bb60 Trace: 16a23b Trace: 12e8c7 Trace: 10a509 Code: movl 0x8(%ebp),%ecx Code: movl %ecx,0x2c(%esp,1) Code: movzwl 0x3e(%ecx),%eax Code: addl %eax,%eax Code: movl %eax,0x1c(%esp,1) Code: cmpl $0x9000047f,%eax Code: nop --===_0________15_07:53:57_MSD_1996 Content-Type: message/rfc822 Content-Description: 1 general protection: 0000 CPU: 0 EIP: 0010:[<0185c01e>] EFLAGS: 00010202 eax: 00c04810 ebx: 011f2a0c ecx: f000ea7a edx: 000000c0 esi: 00000484 edi: 00000480 ebp: 00000010 esp: 00745e98 ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018 Process diald (pid: 327, process nr: 11, stackpage=00745000) Stack: 011f2a0c 00000484 00000480 011f2a98 00000480 011f2a98 00db1000 00173005 00db1930 001a4654 ffaa0055 f000ea7a 0185c6ce 00000010 00000010 011f2a0c 011f2a98 00fdc3d8 00db1000 0185ca2b 011f2a98 00000001 001c5ee8 00fdc3d8 Call Trace: [<00173005>] [<0185c6ce>] [<0185ca2b>] [<0016837c>] [<0016be70>] [<0016be40>] [<0016a8f0>] [<0016a990>] [<0016bf70>] [<0016c6f0>] [<00172960>] [<0016bbf0>] [<0016c8e0>] [<0016aff0>] [<0016bb60>] [<0016a23b>] [<0012e8c7>] [<0010a509>] Code: 0f b7 41 3e 01 c0 89 44 24 1c 3d 7f 04 00 00 7f 08 c7 44 24 --===_0________15_07:53:57_MSD_1996 Content-Type: text/plain; charset=us-ascii Content-Description: 1.sym Using `/usr/src/linux/System.map' to map addresses to symbols. Trace: 173005 Trace: 185c6ce Trace: 185ca2b Trace: 16837c Trace: 16be70 Trace: 16be40 Trace: 16a8f0 Trace: 16a990 Trace: 16bf70 Trace: 16c6f0 Trace: 172960 Trace: 16bbf0 Trace: 16c8e0 Trace: 16aff0 Trace: 16bb60 Trace: 16a23b Trace: 12e8c7 Trace: 10a509 Code: movzwl 0x3e(%ecx),%eax Code: addl %eax,%eax Code: movl %eax,0x1c(%esp,1) Code: cmpl $0x47f,%eax Code: jg 00000019 <_EIP+19> --===_0________15_07:53:57_MSD_1996 Content-Type: message/rfc822 Content-Description: 2 general protection: 0000 CPU: 0 EIP: 0010:[<0185c01e>] EFLAGS: 00010202 eax: 00278018 ebx: 011f2a0c ecx: f000ea7a edx: 000000c0 esi: 00000484 edi: 00000480 ebp: 00000010 esp: 00246e98 ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018 Process diald (pid: 326, process nr: 4, stackpage=00246000) Stack: 011f2a0c 00000484 00000480 011f2a98 00000480 011f2a98 003c8000 00173005 003c8930 001a4654 ffaa0055 f000ea7a 0185c6ce 00000010 00000010 011f2a0c 011f2a98 00fdc7d8 003c8000 0185ca2b 011f2a98 00000001 001c5ee8 00fdc7d8 Call Trace: [<00173005>] [<0185c6ce>] [<0185ca2b>] [<0016837c>] [<0016be70>] [<0016be40>] [<0016a8f0>] [<0016a990>] [<0016bf70>] [<0016c6f0>] [<00172960>] [<0016bbf0>] [<0016c8e0>] [<0016aff0>] [<0016bb60>] [<0016a23b>] [<0012e8c7>] [<0010a509>] Code: 0f b7 41 3e 01 c0 89 44 24 1c 3d 7f 04 00 00 7f 08 c7 44 24 --===_0________15_07:53:57_MSD_1996 Content-Type: text/plain; charset=us-ascii Content-Description: 2.sym Using `/usr/src/linux/System.map' to map addresses to symbols. Trace: 173005 Trace: 185c6ce Trace: 185ca2b Trace: 16837c Trace: 16be70 Trace: 16be40 Trace: 16a8f0 Trace: 16a990 Trace: 16bf70 Trace: 16c6f0 Trace: 172960 Trace: 16bbf0 Trace: 16c8e0 Trace: 16aff0 Trace: 16bb60 Trace: 16a23b Trace: 12e8c7 Trace: 10a509 Code: movzwl 0x3e(%ecx),%eax Code: addl %eax,%eax Code: movl %eax,0x1c(%esp,1) Code: cmpl $0x47f,%eax Code: jg 00000019 <_EIP+19> --===_0________15_07:53:57_MSD_1996 --===_0________15_07:53:57_MSD_1996 Content-Type: text/plain; charset=us-ascii Best regards, -- Boris.