Messages in this thread | | | Subject | Re: conflicts between P20 (ether) and SC200 (scsi) cards | Date | Mon, 15 Apr 1996 12:58:59 -0600 | From | Drew Eckhardt <> |
| |
In message <199604121719.TAA01027@tissot.polytechnique.fr>, delaunay@lix.polyte chnique.fr writes: > > >I know both cards use IRQ9 (INTA# PCI interrupt line). But I can't modify thes >e >settings neither on Ethernet card (it hard coded :-(), nor on SC200 scsi card.
<snip>
>[extracted from motherboard documentation: > To install a PCI card, you need to set something called the INT (interrupt) > assignment. Since all the PCI slots on this motherboard use an INTA#, be > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > sure that the jumpers on your PCI cards are set to INTA.
<snip>
Note that every i86 PCI board I've seen has allowed you to do the PCI INT line (usually INTA only) to i86 IRQ mapping on a per-slot basis. Ie, in my box, I've got INTA mapped to IRQ14 in one slot, and IRQ11 in another.
| |