lkml.org 
[lkml]   [1996]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: 2.1.8 problems
Date
From

>[Serial problems with post 2.1.8 kernels]

I have some input, which might interest you. Me too, I experienced
serial problems in 2.1.9, and noticed that they were due to a mis-set
UART type. The UART was correctly detected as a 16550A during
boot-up, but then it was set to 16450 from /etc/rc.d/rc.serial
(probably a left over from my previous modem). After I removed the
offending line from rc.serial, all was fine and dandy again. Thus, at
least some of the serial problems, maybe be due to a misconfigured
UART type.

Regards,

Alain

\
 
 \ /
  Last update: 2005-03-22 13:38    [W:0.068 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site