lkml.org 
[lkml]   [2024]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 1/2] PM / devfreq: exynos: Use Use devm_clk_get_enabled() helpers
On Wed, Apr 17, 2024 at 1:45 PM Anand Moon <linux.amoon@gmail.com> wrote:
>
> The devm_clk_get_enabled() helpers:
> - call devm_clk_get()
> - call clk_prepare_enable() and register what is needed in order to
> call clk_disable_unprepare() when needed, as a managed resource.
>
> This simplifies the code and avoids the calls to clk_disable_unprepare().
>
> While at it, use dev_err_probe consistently, and use its return value
> to return the error code.
>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
> v3 - No change
> v2 - No change
> ---
> drivers/devfreq/exynos-bus.c | 21 ++++-----------------
> 1 file changed, 4 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
> index 245898f1a88e..153340b6685f 100644
> --- a/drivers/devfreq/exynos-bus.c
> +++ b/drivers/devfreq/exynos-bus.c
> @@ -160,7 +160,6 @@ static void exynos_bus_exit(struct device *dev)
> platform_device_unregister(bus->icc_pdev);
>
> dev_pm_opp_of_remove_table(dev);
> - clk_disable_unprepare(bus->clk);
> dev_pm_opp_put_regulators(bus->opp_token);
> }
>
> @@ -171,7 +170,6 @@ static void exynos_bus_passive_exit(struct device *dev)
> platform_device_unregister(bus->icc_pdev);
>
> dev_pm_opp_of_remove_table(dev);
> - clk_disable_unprepare(bus->clk);
> }
>
> static int exynos_bus_parent_parse_of(struct device_node *np,
> @@ -247,23 +245,15 @@ static int exynos_bus_parse_of(struct device_node *np,
> int ret;
>
> /* Get the clock to provide each bus with source clock */
> - bus->clk = devm_clk_get(dev, "bus");
> - if (IS_ERR(bus->clk)) {
> - dev_err(dev, "failed to get bus clock\n");
> - return PTR_ERR(bus->clk);
> - }
> -
> - ret = clk_prepare_enable(bus->clk);
> - if (ret < 0) {
> - dev_err(dev, "failed to get enable clock\n");
> - return ret;
> - }
> + bus->clk = devm_clk_get_enabled(dev, "bus");
> + if (IS_ERR(bus->clk))
> + return dev_err_probe(dev, PTR_ERR(bus->clk), "failed to get bus clock\n");

nitpick. I recommend that better to keep 80 char on one line as following
for the readability.

return dev_err_probe(dev, PTR_ERR(bus->clk),
"failed to get bus clock\n");


>
> /* Get the freq and voltage from OPP table to scale the bus freq */
> ret = dev_pm_opp_of_add_table(dev);
> if (ret < 0) {
> dev_err(dev, "failed to get OPP table\n");
> - goto err_clk;
> + return ret;
> }
>
> rate = clk_get_rate(bus->clk);
> @@ -281,8 +271,6 @@ static int exynos_bus_parse_of(struct device_node *np,
>
> err_opp:
> dev_pm_opp_of_remove_table(dev);
> -err_clk:
> - clk_disable_unprepare(bus->clk);
>
> return ret;
> }
> @@ -453,7 +441,6 @@ static int exynos_bus_probe(struct platform_device *pdev)
>
> err:
> dev_pm_opp_of_remove_table(dev);
> - clk_disable_unprepare(bus->clk);
> err_reg:
> dev_pm_opp_put_regulators(bus->opp_token);
>
> --
> 2.44.0
>
>


--
Best Regards,
Chanwoo Choi
Samsung Electronics

\
 
 \ /
  Last update: 2024-05-08 17:46    [W:0.069 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site