lkml.org 
[lkml]   [2024]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH net-next 0/1] mlx5: Add netdev-genl queue stats
From


On 09/05/2024 9:30, Joe Damato wrote:
> On Wed, May 08, 2024 at 07:08:39PM -0700, Jakub Kicinski wrote:
>> On Thu, 9 May 2024 01:57:52 +0000 Joe Damato wrote:
>>> If I'm following that right and understanding mlx5 (two things I am
>>> unlikely to do simultaneously), that sounds to me like:
>>>
>>> - mlx5e_get_queue_stats_rx and mlx5e_get_queue_stats_tx check if i <
>>> priv->channels.params.num_channels (instead of priv->stats_nch),
>>
>> Yes, tho, not sure whether the "if i < ...num_channels" is even
>> necessary, as core already checks against real_num_rx_queues.
>>
>>> and when
>>> summing mlx5e_sq_stats in the latter function, it's up to
>>> priv->channels.params.mqprio.num_tc instead of priv->max_opened_tc.
>>>
>>> - mlx5e_get_base_stats accumulates and outputs stats for everything from
>>> priv->channels.params.num_channels to priv->stats_nch, and
>>
>> I'm not sure num_channels gets set to 0 when device is down so possibly
>> from "0 if down else ...num_channels" to stats_nch.
>
> Yea, you were right:
>
> if (priv->channels.num == 0)
> i = 0;
> else
> i = priv->channels.params.num_channels;
>
> for (; i < priv->stats_nch; i++) {
>
> Seems to be working now when I adjust the queue count and the test is
> passing as I adjust the queue count up or down. Cool.
>

I agree that get_base should include all inactive queues stats.
But it's not straight forward to implement.

A few guiding points:

Use mlx5e_get_dcb_num_tc(params) for current num_tc.

txq_ix (within the real_num_tx_queues) is calculated by c->ix + tc *
params->num_channels.

The txqsq stats struct is chosen by channel_stats[c->ix]->sq[tc].

It means, in the base stats you should include SQ stats for:
1. all SQs of non-active channels, i.e. ch in [params.num_channels,
priv->stats_nch), tc in [0, priv->max_opened_tc).
2. all SQs of non-active TCs in active channels [0,
params.num_channels), tc in [mlx5e_get_dcb_num_tc(params),
priv->max_opened_tc).

Now I actually see that the patch has issues in mlx5e_get_queue_stats_tx.
You should not loop over all TCs of channel index i.
You must do a reverse mapping from "i" to the pair/tuple [ch_ix, tc],
and then access a single TXQ stats by priv->channel_stats[ch_ix].sq[tc].

> Adding TCs to the NIC triggers the test to fail, so there's still some bug
> in how I'm accumulating stats from the hw TCs.

\
 
 \ /
  Last update: 2024-05-09 12:16    [W:0.060 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site