lkml.org 
[lkml]   [2024]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 03/10] eeprom: digsy_mtc: Convert to use GPIO descriptors
Date
This converts the driver to use GPIO descriptors exclusively
to retrieve GPIO lines. Drop the old GPIO handling in favor of
the core managing it exclusively.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/misc/eeprom/digsy_mtc_eeprom.c | 46 +++++++++++---------------
1 file changed, 20 insertions(+), 26 deletions(-)

diff --git a/drivers/misc/eeprom/digsy_mtc_eeprom.c b/drivers/misc/eeprom/digsy_mtc_eeprom.c
index 4eddc5ba1af9..88888485e6f8 100644
--- a/drivers/misc/eeprom/digsy_mtc_eeprom.c
+++ b/drivers/misc/eeprom/digsy_mtc_eeprom.c
@@ -14,13 +14,12 @@
* and delete this driver.
*/

-#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
-#include <linux/eeprom_93xx46.h>

#define GPIO_EEPROM_CLK 216
#define GPIO_EEPROM_CS 210
@@ -29,22 +28,13 @@
#define GPIO_EEPROM_OE 255
#define EE_SPI_BUS_NUM 1

-static void digsy_mtc_op_prepare(void *p)
-{
- /* enable */
- gpio_set_value(GPIO_EEPROM_OE, 0);
-}
+static const struct property_entry digsy_mtc_spi_properties[] = {
+ PROPERTY_ENTRY_U32("data-size", 8),
+ { }
+};

-static void digsy_mtc_op_finish(void *p)
-{
- /* disable */
- gpio_set_value(GPIO_EEPROM_OE, 1);
-}
-
-struct eeprom_93xx46_platform_data digsy_mtc_eeprom_data = {
- .flags = EE_ADDR8 | EE_SIZE1K,
- .prepare = digsy_mtc_op_prepare,
- .finish = digsy_mtc_op_finish,
+static const struct software_node digsy_mtc_spi_node = {
+ .properties = digsy_mtc_spi_properties,
};

static struct spi_gpio_platform_data eeprom_spi_gpio_data = {
@@ -70,18 +60,19 @@ static struct gpiod_lookup_table eeprom_spi_gpiod_table = {
"miso", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("gpio@b00", GPIO_EEPROM_CS,
"cs", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio@b00", GPIO_EEPROM_OE,
+ "select", GPIO_ACTIVE_LOW),
{ },
},
};

static struct spi_board_info digsy_mtc_eeprom_info[] __initdata = {
{
- .modalias = "93xx46",
+ .modalias = "eeprom-93xx46",
.max_speed_hz = 1000000,
.bus_num = EE_SPI_BUS_NUM,
.chip_select = 0,
.mode = SPI_MODE_0,
- .platform_data = &digsy_mtc_eeprom_data,
},
};

@@ -89,15 +80,18 @@ static int __init digsy_mtc_eeprom_devices_init(void)
{
int ret;

- ret = gpio_request_one(GPIO_EEPROM_OE, GPIOF_OUT_INIT_HIGH,
- "93xx46 EEPROMs OE");
- if (ret) {
- pr_err("can't request gpio %d\n", GPIO_EEPROM_OE);
- return ret;
- }
gpiod_add_lookup_table(&eeprom_spi_gpiod_table);
spi_register_board_info(digsy_mtc_eeprom_info,
ARRAY_SIZE(digsy_mtc_eeprom_info));
- return platform_device_register(&digsy_mtc_eeprom);
+
+ ret = device_add_software_node(&digsy_mtc_eeprom.dev, &digsy_mtc_spi_node);
+ if (ret)
+ return ret;
+
+ ret = platform_device_register(&digsy_mtc_eeprom);
+ if (ret)
+ device_remove_software_node(&digsy_mtc_eeprom.dev);
+
+ return ret;
}
device_initcall(digsy_mtc_eeprom_devices_init);
--
2.43.0.rc1.1336.g36b5255a03ac

\
 
 \ /
  Last update: 2024-05-08 20:49    [W:0.055 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site