lkml.org 
[lkml]   [2024]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] net: phy: mediatek: add support for built-in 2.5G ethernet PHY on MT7988
On Wed, May 08, 2024 at 02:30:21PM +0200, Andrew Lunn wrote:
> > I'm not sure I really get this. MT7988's internal 2.5Gphy is built
> > inside SoC. We won't have a number of these PHYs.
>
> How long does firmware download take? If you are holding RTNL you are
> blocking all other network configuration. How many Ethernets does this
> device have? If it is just one, it is not too bad, but if there is a
> built in switch, you cannot be configuring that switch at the same
> time firmware download is happening...

The MT7988 SoC has a bunch of network interfaces:

- GMAC0 is typically connected as conduit to a 4-port MT7530-like DSA
switch offering 4 1GE user ports. PHY driver mediatek-ge-soc.c takes
care of those, and yes, they do need some "care"...

- GMAC1 can be used with the internal 2.5GE PHY (ie. with the driver
discussed here) OR for to connect an external PHY or SFP via
1000Base-X, 2500Base-X, SGMII, 5GBase-R, 10GBase-R or USXGMII.

- GMAC2 is can only be used with an external PHY or SFP using
1000Base-X, 2500Base-X, SGMII, 5GBase-R, 10GBase-R or USXGMII.

So while there is only exactly one of the internal 2.5GE PHY there are
many other network interfaces on that same SoC.

I hope that clarifies things a bit.

\
 
 \ /
  Last update: 2024-05-08 18:21    [W:0.023 / U:1.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site