lkml.org 
[lkml]   [2024]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/3] arm64: dts: ti: k3-j722s: Add support for SERDES0
From


On 5/8/24 5:29 PM, Roger Quadros wrote:
>
>
> On 29/04/2024 15:09, Ravi Gunasekaran wrote:
>> Add SERDES0 and its wrapper description to support USB3
>> and SGMII interfaces.
>>
>> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
>> ---
>> arch/arm64/boot/dts/ti/k3-j722s.dtsi | 54 ++++++++++++++++++++++++++++
>> 1 file changed, 54 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
>> index c75744edb143..beba5a3ea6cc 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
>> @@ -9,6 +9,7 @@
>> #include <dt-bindings/interrupt-controller/irq.h>
>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>> #include <dt-bindings/soc/ti,sci_pm_domain.h>
>> +#include <dt-bindings/phy/phy-ti.h>
>>
>> #include "k3-am62p5.dtsi"
>>
>> @@ -75,6 +76,50 @@
>> <0x00 0x78000000 0x00 0x78000000 0x00 0x00008000>,
>> <0x00 0x78100000 0x00 0x78100000 0x00 0x00008000>;
>> };
>> +
>> + serdes_refclk: clock-cmnrefclk {
>
> What could be the generic name here?
>

How about phy-clk or serdes-clk?
I searched for "fixed-clock" and wide range of naming conventions is followed.

>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + clock-frequency = <0>;
>> + };
>> +
>> + serdes_wiz0: wiz@f000000 {
>
> Should generic name be phy?

Since serdes is used for both USB and PCIe,
I can go with "phy".

>
>> + compatible = "ti,am64-wiz-10g";
>> + ranges = <0x0f000000 0x0 0x0f000000 0x00010000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
>> + clocks = <&k3_clks 279 0>, <&k3_clks 279 1>, <&serdes_refclk>;
>> + clock-names = "fck", "core_ref_clk", "ext_ref_clk";
>> + num-lanes = <1>;
>> + #reset-cells = <1>;
>> + #clock-cells = <1>;
>> +
>> + assigned-clocks = <&k3_clks 279 1>;
>> + assigned-clock-parents = <&k3_clks 279 5>;
>> +
>> + serdes0: serdes@f000000 {
>
> here too?

I could use "phy" here as well.
https://elixir.bootlin.com/linux/latest/source/arch/arm64/boot/dts/qcom/sa8775p.dtsi#L1853
https://elixir.bootlin.com/linux/latest/source/arch/arm64/boot/dts/renesas/r8a779f0.dtsi#L563

>
>> + compatible = "ti,j721e-serdes-10g";

[...]

>

--
Regards,
Ravi

\
 
 \ /
  Last update: 2024-05-08 14:35    [W:0.058 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site