lkml.org 
[lkml]   [2024]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 3/7] dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
From
On 07/05/2024 16:48, Johan Hovold wrote:
> When the power supply is shared with other peripherals the reset line
> can be wired in such a way that it can remain deasserted regardless of
> whether the supply is on or not.
>
> This is important as it can be used to avoid holding the controller in
> reset for extended periods of time when it remains powered, something
> which can lead to increased power consumption. Leaving reset deasserted
> also avoids leaking current through the reset circuitry pull-up
> resistors.
>
> Add a new 'no-reset-on-power-off' devicetree property which can be used
> by the OS to determine when reset needs to be asserted on power down.
>
> Note that this property can also be used when the supply cannot be
> turned off by the OS at all.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


\
 
 \ /
  Last update: 2024-05-08 09:29    [W:0.045 / U:0.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site