lkml.org 
[lkml]   [2024]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 2/3] dt-bindings: arm: mediatek: mmsys: Add OF graph support for board path
Date
On Tue, 2024-05-07 at 16:07 +0200, AngeloGioacchino Del Regno wrote:
> Il 07/05/24 08:59, CK Hu (胡俊光) ha scritto:
> > On Thu, 2024-05-02 at 10:50 +0200, AngeloGioacchino Del Regno
> > wrote:
> > > Il 25/04/24 04:23, CK Hu (胡俊光) ha scritto:
> > > > Hi, Angelo:
> > > >
> > > > On Tue, 2024-04-09 at 14:02 +0200, AngeloGioacchino Del Regno
> > > > wrote:
> > > > > Document OF graph on MMSYS/VDOSYS: this supports up to three
> > > > > DDP
> > > > > paths
> > > > > per HW instance (so potentially up to six displays for multi-
> > > > > vdo
> > > > > SoCs).
> > > > >
> > > > > The MMSYS or VDOSYS is always the first component in the DDP
> > > > > pipeline,
> > > > > so it only supports an output port with multiple endpoints -
> > > > > where
> > > > > each
> > > > > endpoint defines the starting point for one of the (currently
> > > > > three)
> > > > > possible hardware paths.
> > > > >
> > > > > Signed-off-by: AngeloGioacchino Del Regno <
> > > > > angelogioacchino.delregno@collabora.com>
> > > > > ---
> > > > > .../bindings/arm/mediatek/mediatek,mmsys.yaml | 23
> > > > > +++++++++++++++++++
> > > > > 1 file changed, 23 insertions(+)
> > > > >
> > > > > diff --git
> > > > > a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mms
> > > > > ys.y
> > > > > aml
> > > > > b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mms
> > > > > ys.y
> > > > > aml
> > > > > index b3c6888c1457..4e9acd966aa5 100644
> > > > > ---
> > > > > a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mms
> > > > > ys.y
> > > > > aml
> > > > > +++
> > > > > b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mms
> > > > > ys.y
> > > > > aml
> > > > > @@ -93,6 +93,29 @@ properties:
> > > > > '#reset-cells':
> > > > > const: 1
> > > > >
> > > > > + port:
> > > > > + $ref: /schemas/graph.yaml#/properties/port
> > > > > + description:
> > > > > + Output port node. This port connects the MMSYS/VDOSYS
> > > > > output
> > > > > to
> > > > > + the first component of one display pipeline, for
> > > > > example
> > > > > one
> > > > > of
> > > > > + the available OVL or RDMA blocks.
> > > > > + Some MediaTek SoCs support up to three display outputs
> > > > > per
> > > > > MMSYS.
> > > > > + properties:
> > > > > + endpoint@0:
> > > > > + $ref: /schemas/graph.yaml#/properties/endpoint
> > > > > + description: Output to the primary display pipeline
> > > > > +
> > > > > + endpoint@1:
> > > > > + $ref: /schemas/graph.yaml#/properties/endpoint
> > > > > + description: Output to the secondary display
> > > > > pipeline
> > > > > +
> > > > > + endpoint@2:
> > > > > + $ref: /schemas/graph.yaml#/properties/endpoint
> > > > > + description: Output to the tertiary display pipeline
> > > > > +
> > > > > + required:
> > > > > + - endpoint@0
> > > > > +
> > > >
> > > > mmsys/vdosys does not output data to the first component of
> > > > display
> > > > pipeline, so this connection looks 'virtual'. Shall we add
> > > > something
> > > > virtual in device tree? You add this in order to decide which
> > > > pipeline
> > > > is 1st, 2nd, 3rd, but for device it don't care which one is
> > > > first.
> > > > In
> > > > computer, software could change which display is the primary
> > > > display.
> > > > I'm not sure it's good to decide display order in device tree?
> > > >
> > >
> > > Devicetree describes hardware, so nothing virtual can be present
> > > -
> > > and in any case,
> > > the primary/secondary/tertiary pipeline is in relation to MM/VDO
> > > SYS,
> > > not referred
> > > to software.
> > >
> > > Better explaining, the primary pipeline is not necessarily the
> > > primary display in
> > > DRM terms: that's a concept that is completely detached from the
> > > scope of this
> > > series and this graph - and it's something that shall be managed
> > > solely by the
> > > driver (mediatek-drm in this case).
> > >
> > > Coming back to the connection looking, but *not* being virtual:
> > > the
> > > sense here is
> > > that the MM/VDOSYS blocks are used in the display pipeline to
> > > "stitch" together
> > > the various display pipeline hardware blocks, or, said
> > > differently,
> > > setting up the
> > > routing between all of those (P.S.: mmsys_mtxxxx_routing_table!)
> > > through the VDO
> > > Input Selection (VDOx_SEL_IN) or Output Selection (VDOx_SEL_OUT)
> > > and
> > > with the
> > > assistance of the VDO Multiple Output Mask (VDOx_MOUT) for the
> > > multiple outputs
> > > usecase, both of which, are described by this graph.
> >
> > I agree this part, but this is related to display device OF graph.
> > These display device would output video data from one device and
> > input
> > to another video device. These video device would not input or
> > output
> > video data to mmsys/vdosys.
> >
> > >
> > > This means that the VDOSYS is really the "master" of the display
> > > pipeline since
> > > everything gets enabled, mixed and matched from there - and
> > > that's in
> > > the sense
> > > of hardware operation, so we are *really* (and not virtually!)
> > > flipping switches.
> >
> > I agree mmsys/vdosys is master of video pipeline, so let's define
> > what
> > the port in mmsys/vdosys is. If the port means the master
> > relationship,
> > mmsys/vdosys should output port to every display device. Or use a
> > simply way to show the master relation ship
> >
> > mmsys-subdev = <&ovl0, &rdma0, &color0, ...>, <&ovl1, &rdma1,
> > &color1,
> > ...>;
> >
>
> There's no need to list all of the VDO0/VDO1/mmsys devices in one big
> array
> property, because the actual possible devices can be defined:
> 1. In the bindings; and
> 2. In the actual OF graph that we write for each SoC+board
> combination.
>
> A graph cannot contain a connection to a device that cannot be
> connected to
> the previous, so, your "mmsys-subdev" list can be retrieved by
> looking at the
> graph:
> - Start from VDO0/1 or MMSYS
> - Walk through (visually, even) OUTPUT ports
> - VDO0 (read output ep) -> ovl0 (read output ep) -> rdma0 (read
> output ep) ->
> color0 (...) -> etc
> - Nothing more - it's all defined there.
>
> >
> > Another problem is how to group display device? If two pipeline
> > could
> > be route to the same display interface, such as
> >
> > rdma0 -> dsi
> > rdma1 -> dsi
> >
> > Would this be single group?
>
> There are multiple ways of doing this, but one that comes to my mind
> right now and
> that looks clean as well is the following:
>
> ovl0@ef01 {
> .....
> ports {
> port@0 {
> reg = <0>;
> ovl0_in: endpoint {
> remote-endpoint = <&vdosys0_out>;
> };
> };

I'm not sure how do you define this port from OVL to vdosys. If this
port means 'master relationship', others could add port in COLOR to
point to vdosys because COLOR and vdosys has the 'master relationship'
and I could not reject this. So we need more specific definition of
this port. Only the 'first' device in pipeline could have this port? In
mt8173, one pipeline is

ovl -> color -> aal -> od -> rdma -> ufo -> dsi

But rdma has an option to read data from od or directly from DRAM. If
from DRAM, the pipeline would be changed to

rdma -> ufo -> dsi


So it's confused which one is 'first'.
I don't know how to decide which device could point to mmsys/vdosys. So
please give a specific definition.

Regards,
CK

>
> port@1 {
> reg = <1>;
> ovl0_out0: endpoint@0 {
> remote-endpoint = <&rdma0_in>;
> };
> ovl0_out1: endpoint@1 {
> remote-endpoint = <&rdma1_in>;
> };
> };
> };
> };
>
> rdma0@1234 {
> .....
> ports {
> port@0 {
> reg = <0>;
> rdma0_in: endpoint {
> remote-endpoint = <&ovl0_out0>; /* assuming ovl0 outputs to
> rdma0...*/
> };
> };
> port@1 {
> reg = <1>;
> rdma0_out: endpoint@1 {
> remote-endpoint = <&dsi_dual_intf0_in>;
> };
> };
> };
> };
>
>
> rdma1@5678 {
> .....
> ports {
> port@0 {
> reg = <0>;
> rdma1_in: endpoint {
> /* assuming ovl0 outputs to rdma1 as well... can be
> something else. */
> remote-endpoint = <&ovl0_out1>;
> };
> };
> port@1 {
> reg = <1>;
> rdma1_out: endpoint {
> remote-endpoint = <&dsi_dual_intf1_in>;
> };
> };
> };
> };
>
>
> dsi@9abcd {
> .....
> ports {
> port@0 {
> reg = <0>;
> /* Where endpoint@0 could be always DSI LEFT CTRL */
> dsi_dual_intf0_in: endpoint@0 {
> remote-endpoint = <&rdma0_out>;
> };
> /* ...and @1 could be always DSI RIGHT CTRL */
> dsi_dual_intf1_in: endpoint@1 {
> remote-endpoint = <&rdma1_out>;
> };
> };
>
> port@1 {
> reg = <1>;
> dsi0_out: endpoint {
> remote-endpoint = <&dsi_panel_in>;
> };
> };
> };
> };
>
> ...for a dual-dsi panel, it'd be a similar graph.
>
> Cheers,
> Angelo
>
> >
> > mmsys-subdev = <&rdma0, &rdma1, &dsi>;
> >
> > Or two group?
> >
> > mmsys-subdev = <&rdma0, &dsi>, <&rdma1, &dsi>;
> >
> > I think we should clearly define this.
> >
> > Regards,
> > CK
> >
> > >
> > >
> > > Cheers,
> > > Angelo
> > >
> > > > Regards,
> > > > CK
> > > >
> > > >
> > > > > required:
> > > > > - compatible
> > > > > - reg
> > >
> > >
>
>
>
\
 
 \ /
  Last update: 2024-05-08 09:19    [W:0.074 / U:1.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site