lkml.org 
[lkml]   [2024]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v7 1/1] drivers: watchdog: revise watchdog bootstatus
From
On 4/26/24 07:45, Chia Hsing Yin wrote:
> I can include reset condition in struct maybe like this
>
> static const struct aspeed_wdt_config ast2600_config = {
> .ext_pulse_width_mask = 0xfffff,
> .irq_shift = 0,
> .irq_mask = GENMASK(31, 10),
> .compatible = "aspeed,ast2600-scu",
> .reset_event = AST2600_SYSTEM_RESET_EVENT,
> .watchdog_reset_flag = AST2600_WATCHDOG_RESET_FLAG,
> .extern_reset_flag = EXTERN_RESET_FLAG,
> .reset_flag_clear = AST2600_RESET_FLAG_CLEAR,
> };
>
> in probe( ) we just call
>
> scu_base = syscon_regmap_lookup_by_compatible(wdt->cfg->compatible);
> if (IS_ERR(scu_base))
> return PTR_ERR(scu_base);
>
> ret = regmap_read(scu_base, wdt->cfg->reset_event, &status);
> if (ret)
> return ret;
>
> if ((status & POWERON_RESET_FLAG) == 0 &&

If you do that, please use
if (!(status & POWERON_RESET_FLAG) && ...

> status & wdt->cfg->watchdog_reset_flag)
> wdt->wdd.bootstatus = (status & wdt->cfg->extern_reset_flag) ?
> WDIOF_EXTERN1 : WDIOF_CARDRESET;
>
> status = wdt->cfg->watchdog_reset_flag | POWERON_RESET_FLAG |
> wdt->cfg->extern_reset_flag;
>
> ret = regmap_write(scu_base, wdt->cfg->reset_event, status);
>
> Does this meet your expectations?
>
> On Fri, Apr 26, 2024 at 8:42 AM Andrew Jeffery
> <andrew@codeconstruct.com.au> wrote:
>>
>> On Thu, 2024-04-25 at 17:07 +0800, Peter Yin wrote:
>>> Regarding the AST2600 specification, the WDTn Timeout Status Register
>>> (WDT10) has bit 1 reserved. Bit 1 of the status register indicates
>>> on ast2500 if the boot was from the second boot source.
>>> It does not indicate that the most recent reset was triggered by
>>> the watchdog. The code should just be changed to set WDIOF_CARDRESET
>>> if bit 0 of the status register is set. However, this bit can be clear when
>>> watchdog register 0x0c bit1(Reset System after timeout) is enabled.
>>> Thereforce include SCU register to veriy WDIOF_EXTERN1 and WDIOF_CARDRESET
>>> in ast2600 SCU74 or ast2400/ast2500 SCU3C.
>>>
>>> Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
>>> ---
>>> drivers/watchdog/aspeed_wdt.c | 109 ++++++++++++++++++++++++++++++++--
>>> 1 file changed, 103 insertions(+), 6 deletions(-)
>>
>> After this patch the probe() implementation is ~250loc with a whole
>> bunch of conditional behaviours based on the SoC version. Maybe it's
>> time to break it up into version-specific functions that are called
>> from the probe() implementation?
>>
>> Andrew


\
 
 \ /
  Last update: 2024-05-27 18:05    [W:0.055 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site