lkml.org 
[lkml]   [2023]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Date
    Subject[PATCH 6/6] riscv: dts: thead: Enable LicheePi 4A eMMC controller
    Add properties to the emmc node and enable it and set the frequency for
    the sdhci clock.

    Signed-off-by: Drew Fustini <dfustini@baylibre.com>
    ---
    arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi | 15 +++++++++++++++
    1 file changed, 15 insertions(+)

    diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
    index a802ab110429..3de8ae0a4384 100644
    --- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
    +++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
    @@ -29,6 +29,10 @@ &apb_clk {
    clock-frequency = <62500000>;
    };

    +&sdhci_clk {
    + clock-frequency = <198000000>;
    +};
    +
    &uart_sclk {
    clock-frequency = <100000000>;
    };
    @@ -36,3 +40,14 @@ &uart_sclk {
    &dmac0 {
    status = "okay";
    };
    +
    +&mmc0 {
    + bus-width = <8>;
    + max-frequency = <198000000>;
    + mmc-hs400-1_8v;
    + non-removable;
    + no-sdio;
    + no-sd;
    + thead,phy-pull-up;
    + status = "okay";
    +};
    --
    2.34.1

    \
     
     \ /
      Last update: 2023-09-22 03:51    [W:2.293 / U:0.108 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site