lkml.org 
[lkml]   [2022]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] arm64: dts: qcom: sc8280xp: drop broken DP PHY nodes
Date
The DP PHY register layout of the current binding do not apply to the
newer USB4/USB3/DP PHY which uses a different register layout entirely.

Drop the DP PHY subnodes until the binding has been updated to prevent
the driver from corrupting unrelated registers.

Note that this is also needed in order to not break USB with an upcoming
PHY driver change that checks for overlapping register regions.

Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 20 --------------------
1 file changed, 20 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index c734cac84719..014d72e49c74 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1191,16 +1191,6 @@ usb_0_ssphy: usb3-phy@88eb400 {
clock-names = "pipe0";
clock-output-names = "usb0_phy_pipe_clk_src";
};
-
- usb_0_dpphy: dp-phy@88ed200 {
- reg = <0 0x088ed200 0 0x200>,
- <0 0x088ed400 0 0x200>,
- <0 0x088eda00 0 0x200>,
- <0 0x088ea600 0 0x200>,
- <0 0x088ea800 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
};

usb_1_hsphy: phy@8902000 {
@@ -1253,16 +1243,6 @@ usb_1_ssphy: usb3-phy@8903400 {
clock-names = "pipe0";
clock-output-names = "usb1_phy_pipe_clk_src";
};
-
- usb_1_dpphy: dp-phy@8904200 {
- reg = <0 0x08904200 0 0x200>,
- <0 0x08904400 0 0x200>,
- <0 0x08904a00 0 0x200>,
- <0 0x08904600 0 0x200>,
- <0 0x08904800 0 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
};

system-cache-controller@9200000 {
--
2.35.1
\
 
 \ /
  Last update: 2022-09-19 11:46    [W:0.087 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site