lkml.org 
[lkml]   [2020]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 11/13] dt-bindings: tegra: Update csi data-lanes to maximum 8 lanes
Date
Tegra VI/CSI hardware don't have native 8 lane CSI RX port.

But x8 capture can be supported by using consecutive x4 ports
simultaneously with HDMI-to-CSI bridges where source image is split
on to two x4 ports.

This patch updates dt-bindings for csi endpoint data-lane property
with maximum of 8 lanes.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
.../devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 34d9933..8a6d3e1 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -111,8 +111,8 @@ of the following host1x client modules:

endpoint (required node)
Required properties:
- - data-lanes: an array of data lane from 1 to 4. Valid array
- lengths are 1/2/4.
+ - data-lanes: an array of data lane from 1 to 8. Valid array
+ lengths are 1/2/4/8.
- remote-endpoint: phandle to sensor 'endpoint' node.

port@1 (required node)
--
2.7.4
\
 
 \ /
  Last update: 2020-12-03 20:04    [W:0.152 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site