lkml.org 
[lkml]   [2020]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 11/48] opp: Add dev_pm_opp_find_level_ceil()
On 24-12-20, 16:00, Dmitry Osipenko wrote:
> In a device driver I want to set PD to the lowest performance state by
> removing the performance vote when dev_pm_opp_set_rate(dev, 0) is
> invoked by the driver.
>
> The OPP core already does this, but if OPP levels don't start from 0 in
> a device-tree for PD, then it currently doesn't work since there is a
> need to get a rounded-up performance state because
> dev_pm_opp_set_voltage() takes OPP entry for the argument (patches 9 and
> 28).
>
> The PD powering off and performance-changes are separate from each other
> in the GENPD core. The GENPD core automatically turns off domain when
> all devices within the domain are suspended by system-suspend or RPM.
>
> The performance state of a power domain is controlled solely by a device
> driver. GENPD core only aggregates the performance requests, it doesn't
> change the performance state of a domain by itself when device is
> suspended or resumed, IIUC this is intentional. And I want to put domain
> into lowest performance state when device is suspended.

Right, so if you really want to just drop the performance vote, then with a
value of 0 for the performance state the call will reach to your genpd's
callback ->set_performance_state(). Just as dev_pm_opp_set_rate() accepts the
frequency to be 0, I would expect dev_pm_opp_set_rate() to accept opp argument
as NULL and in that case set voltage to 0 and do regulator_disable() as well.
Won't that work better than going for the lowest voltage ?

--
viresh

\
 
 \ /
  Last update: 2020-12-28 07:25    [W:0.132 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site