lkml.org 
[lkml]   [2020]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: (subset) [PATCH v4 1/4] irqchip: qcom-pdc: Fix phantom irq when changing between rising/falling
Date
On Fri, 11 Dec 2020 14:15:35 -0800, Douglas Anderson wrote:
> We have a problem if we use gpio-keys and configure wakeups such that
> we only want one edge to wake us up. AKA:
> wakeup-event-action = <EV_ACT_DEASSERTED>;
> wakeup-source;
>
> Specifically we end up with a phantom interrupt that blocks suspend if
> the line was already high and we want wakeups on rising edges (AKA we
> want the GPIO to go low and then high again before we wake up). The
> opposite is also problematic.
>
> [...]

Applied to irq/irqchip-next, thanks!

[1/4] irqchip: qcom-pdc: Fix phantom irq when changing between rising/falling
commit: 2f5fbc4305d07725bfebaedb09e57271315691ef

Cheers,

M.
--
Without deviation from the norm, progress is not possible.


\
 
 \ /
  Last update: 2020-12-12 11:51    [W:0.091 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site