lkml.org 
[lkml]   [2019]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] dmaengine: dma-jz4780: Break descriptor chains on JZ4740
On 14-07-19, 17:55, Paul Cercueil wrote:
> The current driver works perfectly fine on every generation of the
> JZ47xx SoCs, except on the JZ4740.
>
> There, when hardware descriptors are chained together (with the LINK
> bit set), the next descriptor isn't automatically fetched as it should -
> instead, an interrupt is raised, even if the TIE bit (Transfer Interrupt
> Enable) bit is cleared. When it happens, the DMA transfer seems to be
> stopped (it doesn't chain), and it's uncertain how many bytes have
> actually been transferred.
>
> Until somebody smarter than me can figure out how to make chained
> descriptors work on the JZ4740, we now disable chained descriptors on
> that particular SoC.

Applied, thanks

--
~Vinod

\
 
 \ /
  Last update: 2019-07-25 15:30    [W:0.088 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site