lkml.org 
[lkml]   [2013]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/5] ARM: shmobile: CPUFreq support on Lager
Hi Guennadi,

On Mon, Sep 30, 2013 at 05:25:42PM +0200, Guennadi Liakhovetski wrote:
> Hi Simon,
>
> Just a quick check of the status of this patch series:
>
> On Thu, 26 Sep 2013, Guennadi Liakhovetski wrote:
>
> > On Lager a da9210 regulator is used to supply DVFS power to the SoC. This
> > patch series adds I2C and Z-clock support on r8a7790 and CPUFreq support
> > for the Lager board. Please note, that patch 4/4 is an RFC as explained
> > inline.
> >
> > Developed on top of today's
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git devel
> >
> > plus i2c-rcar patches from my earlier patch series
> >
> > [PATCH v2 0/5] i2c: rcar: Device Tree support and clock improvements
> >
> > and the "sh-pfc: r8a7790: Add I2C pin groups and functions" patch from
> > Ulrich Hecht.
> >
> > All changes since v1 are noted in respective patches. They all are trivial,
> > still as soon as test hardware is available, it would be good to run-time
> > test this version too.
> >
> > Cc: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
> >
> > Guennadi Liakhovetski (5):
> > pinctrl: sh-pfc: r8a7790: add pin definitions for the I2C3 interface
>
> Laurent has taken this one.
>
> > ARM: shmobile: r8a7790: add I2C clocks and aliases for the DT mode
> > ARM: shmobile: r8a7790: add I2C DT nodes
>
> You've applied the above two too, thanks.
>
> > ARM: shmobile: r8a7790: add CPUFreq clock support
>
> Do I see it right, that you're waiting for a review for the above one?

Yes, sorry for not being clearer.
I would like a review of this.

> > ARM: shmobile: lager: (DEVEL) add CPUFreq support
>
> Once a review of #4/5 is posted, I can split the above patch into two to
> separate shmobile and DT parts, as requested by Sergei. Is that about what
> you're expecting too?

Again, sorry for not being clearer. Yes, I agree with Sergei.
I would like the patch split into a DT patch and a board patch.


\
 
 \ /
  Last update: 2013-10-01 02:21    [W:0.848 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site