lkml.org 
[lkml]   [2008]   [Jun]   [6]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
DateThu, 5 Jun 2008 22:41:01 -0700
From"Yinghai Lu" <>
SubjectRe: x86_64 boot hang when CONFIG_NUMA=n
On Thu, Jun 5, 2008 at 2:50 PM, Randy Dunlap <randy.dunlap@oracle.com> wrote:
> On 2.6.26-rc[2345], I am seeing a hang during boot with CONFIG_NUMA=n, but changing
> to CONFIG_NUMA=y allows successful boot.>> This is on a 4-way AMD64 (HP) server with 8 GB RAM.
>> Using initcall_debug, the last output on a hang is from arch/x86/pci/k8-bus_64.c:
>> calling  early_fill_mp_bus_info+0x0/0x7b2> node 0 link 1: io port [1000, 3fff]> node 1 link 2: io port [4000, ffff]> TOM: 0000000080000000 aka 2048M> node 0 link 1: mmio [e8000000, fddfffff]> node 1 link 2: mmio [fde00000, fdffffff]> node 0 link 1: mmio [80000000, 83ffffff]> node 1 link 2: mmio [84000000, 8fffffff]> node 0 link 1: mmio [a0000, bffff]> TOM2: 0000000280000000 aka 10240M> bus: [00,3f] on node 0 link 1> bus: 00 index 0 io port: [0, 3fff]> bus: 00 index 1 mmio: [90000000, fddfffff]> bus: 00 index 2 mmio: [80000000, 83ffffff]> bus: 00 index 3 mmio: [a0000, bffff]> bus: 00 index 4 mmio: [fe000000, ffffffff]> bus: 00 index 5 mmio: [280000000, fcffffffff]> bus: [40,ff] on node 1 link 2> bus: 40 index 0 io port: [4000, ffff]> bus: 40 index 1 mmio: [fde00000, fdffffff]>>> There should be an index 2 line printed next, like this slightly modifed for debug
> version does (with CONFIG_NUMA=y), or maybe the following line(s) just aren't
> making it to the (net)console log and some other initcall function is actually
> hanging:  (??)>> bus: [40,ff] on node 1 link 2> bus: 40 index 0/3 io port: [4000, ffff]> bus: 40 index 1/3 mmio: [fde00000, fdffffff]> bus: 40 index 2/3 mmio: [84000000, 8fffffff]> early_fill_mp_bus_info: done>>> Has anyone seen something like this?  Any patches to test?
>> The next initcall functions (on a working boot) are:
>> calling  arch_kdebugfs_init+0x0/0x8> initcall arch_kdebugfs_init+0x0/0x8 returned 0 after 0 msecs
> calling  mtrr_if_init+0x0/0x77> initcall mtrr_if_init+0x0/0x77 returned 0 after 0 msecs
> calling  ffh_cstate_init+0x0/0x31> initcall ffh_cstate_init+0x0/0x31 returned -1 after 0 msecs
> initcall ffh_cstate_init+0x0/0x31 returned with error code -1
> calling  acpi_pci_init+0x0/0x4a> ACPI: bus type pci registered> initcall acpi_pci_init+0x0/0x4a returned 0 after 0 msecs

can you send out your config?

YH


\
 
 \ /
  Last update: 2008-06-06 07:43    [from the cache]
©2003-2008