lkml.org 
[lkml]   [2006]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] Add support for Korenix 16C950-based PCI cards
On Wed, Dec 20, 2006 at 04:33:10PM +0300, Andrey Panin wrote:
> On 347, 12 13, 2006 at 02:45:46PM +0000, Russell King wrote:
> > Linus, Andrew,
> >
> > This patch adds initial support to 8250-pci for the Korenix Jetcard PCI
> > serial cards. The JC12xx cards are standard RS232-based serial cards
> > utilising the Oxford 16C950 device.
> >
> > The JC14xx are RS422/RS485-based cards, but in order for these to be
> > supported natively, we will need additional tweaks to the 8250 layers
> > so we can specify some values for the 950's registers. Hence, these
> > two entries are commented out.
>
> IIRC 16c950 just need two bits in ACR set properly. Will attached patch
> do the trick ?

I, too, also have a patch which does something similar. I'm going to
hold off on that until post 2.6.20 though, especially as I have no
way to test it.

--
Russell King
Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/
maintainer of:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2006-12-20 20:09    [W:0.031 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site