lkml.org 
[lkml]   [2024]   [Apr]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] wifi: carl9170: add a proper sanity check for endpoints
From
On 4/22/24 8:33 PM, Nikita Zhandarovich wrote:
> Syzkaller reports [1] hitting a warning which is caused by presence
> of a wrong endpoint type at the URB sumbitting stage. While there
> was a check for a specific 4th endpoint, since it can switch types
> between bulk and interrupt, other endpoints are trusted implicitly.
> Similar warning is triggered in a couple of other syzbot issues [2].
>
> Fix the issue by doing a comprehensive check of all endpoints
> taking into account difference between high- and full-speed
> configuration.
>
> This patch has not been tested on real hardware.

Oh, I've tested the original patch on real hardware ;). You can remove that line.

USB: 0846:9010 NetGear, Inc. WNDA3100v1 802.11abgn [Atheros AR9170+AR9104]
USB: 0CF3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 / TL-WN822N v1 802.11n [Atheros AR9170]

With both high- and full-speed configuration on two different hcds.
In both cases the driver works the same as before and the interface comes up.

I can retest this patch tomorrow/saturday in case you want to wait around.

But I don't "see" how this can go wrong.

Acked-By: Christian Lamparter <chunkeey@gmail.com>

I assume the "Reported-and-tested" means that syzbot has verified that with
this patch, it can no longer get the USB-core to throw a warning, right?
<https://syzkaller.appspot.com/bug?extid=e394db78ae0b0032cb4d> says under
"Last patch testing requests) that it tested on the 2024/04/17 and the result
was "error OK"? )

Cheers,
Christian

>
> [1] Syzkaller report:
> ...
> WARNING: CPU: 0 PID: 4721 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
> ...
> Call Trace:
> <TASK>
> carl9170_usb_send_rx_irq_urb+0x273/0x340 drivers/net/wireless/ath/carl9170/usb.c:504
> carl9170_usb_init_device drivers/net/wireless/ath/carl9170/usb.c:939 [inline]
> carl9170_usb_firmware_finish drivers/net/wireless/ath/carl9170/usb.c:999 [inline]
> carl9170_usb_firmware_step2+0x175/0x240 drivers/net/wireless/ath/carl9170/usb.c:1028
> request_firmware_work_func+0x130/0x240 drivers/base/firmware_loader/main.c:1107
> process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289
> worker_thread+0x669/0x1090 kernel/workqueue.c:2436
> kthread+0x2e8/0x3a0 kernel/kthread.c:376
> ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
> </TASK>
>
> [2] Related syzkaller crashes:
> Link: https://syzkaller.appspot.com/bug?extid=e394db78ae0b0032cb4d
> Link: https://syzkaller.appspot.com/bug?extid=9468df99cb63a4a4c4e1
>
> Reported-and-tested-by: syzbot+0ae4804973be759fa420@syzkaller.appspotmail.com
> Fixes: a84fab3cbfdc ("carl9170: 802.11 rx/tx processing and usb backend")
> Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
> ---
> v2: as Christian Lamparter <chunkeey@gmail.com> was kind to point out,
> before returning with error, make sure to free previously allocated
> 'ar' with carl9170_free(ar).
>
> drivers/net/wireless/ath/carl9170/usb.c | 32 ++++++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
> index c4edf8355941..a3e03580cd9f 100644
> --- a/drivers/net/wireless/ath/carl9170/usb.c
> +++ b/drivers/net/wireless/ath/carl9170/usb.c
> @@ -1069,6 +1069,38 @@ static int carl9170_usb_probe(struct usb_interface *intf,
> ar->usb_ep_cmd_is_bulk = true;
> }
>
> + /* Verify that all expected endpoints are present */
> + if (ar->usb_ep_cmd_is_bulk) {
> + u8 bulk_ep_addr[] = {
> + AR9170_USB_EP_RX | USB_DIR_IN,
> + AR9170_USB_EP_TX | USB_DIR_OUT,
> + AR9170_USB_EP_CMD | USB_DIR_OUT,
> + 0};
> + u8 int_ep_addr[] = {
> + AR9170_USB_EP_IRQ | USB_DIR_IN,
> + 0};
> + if (!usb_check_bulk_endpoints(intf, bulk_ep_addr) ||
> + !usb_check_int_endpoints(intf, int_ep_addr))
> + err = -ENODEV;
> + } else {
> + u8 bulk_ep_addr[] = {
> + AR9170_USB_EP_RX | USB_DIR_IN,
> + AR9170_USB_EP_TX | USB_DIR_OUT,
> + 0};
> + u8 int_ep_addr[] = {
> + AR9170_USB_EP_IRQ | USB_DIR_IN,
> + AR9170_USB_EP_CMD | USB_DIR_OUT,
> + 0};
> + if (!usb_check_bulk_endpoints(intf, bulk_ep_addr) ||
> + !usb_check_int_endpoints(intf, int_ep_addr))
> + err = -ENODEV;
> + }
> +
> + if (err) {
> + carl9170_free(ar);
> + return err;
> + }
> +
> usb_set_intfdata(intf, ar);
> SET_IEEE80211_DEV(ar->hw, &intf->dev);
>


\
 
 \ /
  Last update: 2024-05-27 18:04    [W:0.083 / U:3.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site