lkml.org 
[lkml]   [2024]   [May]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next v4 05/12] net: ethernet: oa_tc6: implement error interrupts unmasking
> Kernel output:
> [ 94.361312] sched: RT throttling activated
>
> top output:
> PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
> 145 root -51 0 0 0 0 R 95.5 0.0 1:11.22 oa-tc6-spi-thread
>
> link stats:
> 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
> link/ether 32:c2:7e:22:93:99 brd ff:ff:ff:ff:ff:ff
> RX: bytes packets errors dropped missed mcast
> 3371902 7186 0 48 0 0
> RX errors: length crc frame fifo overrun
> 0 0 0 0 0
> TX: bytes packets errors dropped carrier collsns
> 10341438 8071 0 0 0 0
> TX errors: aborted fifo window heartbt transns
> 0 0 0 0 1
> state:
> Completly borked, can't ping in or out, bringing the interface down then up
> has no effect.

Completely borked is not good.

> I'd be keen on hearing what Microchips plans to address. If tracking
> down performance issues is a priority I'll probably not spend any time
> on it, if not then I'll definetly dig into it more.

Borked ! = performance issue. This should be addressed. Lets see if
the python scripts are enough to be able to reproduce it.

We should not rule out differences in SPI drivers. So it might be you
need to debug this, if Microchip cannot reproduce it.

I would also suggest you enable the "kernel hacking" debug features
for finding deadlocks, bad spinlocks, stuck RT tasks etc. That might
give some clues.

Andrew

\
 
 \ /
  Last update: 2024-05-27 18:12    [W:0.128 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site